/*- * SPDX-License-Identifier: BSD-3-Clause * * Copyright (C) 2007-2011 MARVELL INTERNATIONAL LTD. * All rights reserved. * * Developed by Semihalf. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * 3. Neither the name of MARVELL nor the names of contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF * SUCH DAMAGE. */ #ifndef _MVREG_H_ #define _MVREG_H_ #include #define IRQ_CAUSE 0x0 #define IRQ_MASK 0x4 #define FIQ_MASK 0x8 #define ENDPOINT_IRQ_MASK(n) 0xC #define IRQ_CAUSE_HI 0x10 #define IRQ_MASK_HI 0x14 #define FIQ_MASK_HI 0x18 #define ENDPOINT_IRQ_MASK_HI(n) 0x1C #define ENDPOINT_IRQ_MASK_ERROR(n) (-1) #define IRQ_CAUSE_ERROR (-1) /* Fake defines for unified */ #define IRQ_MASK_ERROR (-1) /* interrupt controller code */ #define MAIN_IRQ_NUM 116 #define ERR_IRQ_NUM 32 #define ERR_IRQ (MAIN_IRQ_NUM) #define MSI_IRQ (ERR_IRQ + ERR_IRQ_NUM) #define MSI_IRQ_NUM 32 #define IRQ_CPU_SELF 0x00000001 #define BRIDGE_IRQ_CAUSE_ARMADAXP 0x68 #define IRQ_TIMER0_ARMADAXP 0x00000001 #define IRQ_TIMER1_ARMADAXP 0x00000002 #define IRQ_TIMER_WD_ARMADAXP 0x00000004 #define BRIDGE_IRQ_CAUSE 0x10 #define IRQ_CPU_SELF 0x00000001 #define IRQ_TIMER0 0x00000002 #define IRQ_TIMER1 0x00000004 #define IRQ_TIMER_WD 0x00000008 #define BRIDGE_IRQ_MASK 0x14 #define IRQ_CPU_MASK 0x00000001 #define IRQ_TIMER0_MASK 0x00000002 #define IRQ_TIMER1_MASK 0x00000004 #define IRQ_TIMER_WD_MASK 0x00000008 #define IRQ_CPU_SELF_CLR (~IRQ_CPU_SELF) #define IRQ_TIMER0_CLR (~IRQ_TIMER0) #define IRQ_TIMER_WD_CLR (~IRQ_TIMER_WD) #define IRQ_TIMER0_CLR_ARMADAXP (~IRQ_TIMER0_ARMADAXP) #define IRQ_TIMER_WD_CLR_ARMADAXP (~IRQ_TIMER_WD_ARMADAXP) /* * System reset */ #define RSTOUTn_MASK_ARMV7 0x60 #define SYSTEM_SOFT_RESET_ARMV7 0x64 #define SOFT_RST_OUT_EN_ARMV7 0x00000001 #define SYS_SOFT_RST_ARMV7 0x00000001 #define RSTOUTn_MASK 0x8 #define SOFT_RST_OUT_EN 0x00000004 #define SYSTEM_SOFT_RESET 0xc #define SYS_SOFT_RST 0x00000001 #define RSTOUTn_MASK_WD 0x400 #define WD_RSTOUTn_MASK 0x4 #define WD_GLOBAL_MASK 0x00000100 #define WD_CPU0_MASK 0x00000001 #define WD_RST_OUT_EN 0x00000002 /* * Power Control */ #define CPU_PM_CTRL 0x1C #define CPU_PM_CTRL_NONE 0 #define CPU_PM_CTRL_ALL ~0x0 #define CPU_PM_CTRL_CRYPTO (CPU_PM_CTRL_NONE) #define CPU_PM_CTRL_IDMA (CPU_PM_CTRL_NONE) #define CPU_PM_CTRL_XOR (CPU_PM_CTRL_NONE) #define CPU_PM_CTRL_SATA (CPU_PM_CTRL_NONE) #define CPU_PM_CTRL_USB(u) (CPU_PM_CTRL_NONE) #define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_NONE) /* * Timers */ #define CPU_TIMERS_BASE 0x300 #define CPU_TIMER_CONTROL 0x0 #define CPU_TIMER0_EN 0x00000001 #define CPU_TIMER0_AUTO 0x00000002 #define CPU_TIMER1_EN 0x00000004 #define CPU_TIMER1_AUTO 0x00000008 #define CPU_TIMER2_EN 0x00000010 #define CPU_TIMER2_AUTO 0x00000020 #define CPU_TIMER_WD_EN 0x00000100 #define CPU_TIMER_WD_AUTO 0x00000200 /* 25MHz mode is Armada XP - specific */ #define CPU_TIMER_WD_25MHZ_EN 0x00000400 #define CPU_TIMER0_25MHZ_EN 0x00000800 #define CPU_TIMER1_25MHZ_EN 0x00001000 #define CPU_TIMER0_REL 0x10 #define CPU_TIMER0 0x14 /* * SATA */ #define SATA_CHAN_NUM 2 #define EDMA_REGISTERS_OFFSET 0x2000 #define EDMA_REGISTERS_SIZE 0x2000 #define SATA_EDMA_BASE(ch) (EDMA_REGISTERS_OFFSET + \ ((ch) * EDMA_REGISTERS_SIZE)) /* SATAHC registers */ #define SATA_CR 0x000 /* Configuration Reg. */ #define SATA_CR_NODMABS (1 << 8) #define SATA_CR_NOEDMABS (1 << 9) #define SATA_CR_NOPRDPBS (1 << 10) #define SATA_CR_COALDIS(ch) (1 << (24 + ch)) /* Interrupt Coalescing Threshold Reg. */ #define SATA_ICTR 0x00C #define SATA_ICTR_MAX ((1 << 8) - 1) /* Interrupt Time Threshold Reg. */ #define SATA_ITTR 0x010 #define SATA_ITTR_MAX ((1 << 24) - 1) #define SATA_ICR 0x014 /* Interrupt Cause Reg. */ #define SATA_ICR_DMADONE(ch) (1 << (ch)) #define SATA_ICR_COAL (1 << 4) #define SATA_ICR_DEV(ch) (1 << (8 + ch)) #define SATA_MICR 0x020 /* Main Interrupt Cause Reg. */ #define SATA_MICR_ERR(ch) (1 << (2 * ch)) #define SATA_MICR_DONE(ch) (1 << ((2 * ch) + 1)) #define SATA_MICR_DMADONE(ch) (1 << (4 + ch)) #define SATA_MICR_COAL (1 << 8) #define SATA_MIMR 0x024 /* Main Interrupt Mask Reg. */ /* Shadow registers */ #define SATA_SHADOWR_BASE(ch) (SATA_EDMA_BASE(ch) + 0x100) #define SATA_SHADOWR_CONTROL(ch) (SATA_EDMA_BASE(ch) + 0x120) /* SATA registers */ #define SATA_SATA_SSTATUS(ch) (SATA_EDMA_BASE(ch) + 0x300) #define SATA_SATA_SERROR(ch) (SATA_EDMA_BASE(ch) + 0x304) #define SATA_SATA_SCONTROL(ch) (SATA_EDMA_BASE(ch) + 0x308) #define SATA_SATA_FISICR(ch) (SATA_EDMA_BASE(ch) + 0x364) /* EDMA registers */ #define SATA_EDMA_CFG(ch) (SATA_EDMA_BASE(ch) + 0x000) #define SATA_EDMA_CFG_QL128 (1 << 19) #define SATA_EDMA_CFG_HQCACHE (1 << 22) #define SATA_EDMA_IECR(ch) (SATA_EDMA_BASE(ch) + 0x008) #define SATA_EDMA_IEMR(ch) (SATA_EDMA_BASE(ch) + 0x00C) #define SATA_EDMA_REQBAHR(ch) (SATA_EDMA_BASE(ch) + 0x010) #define SATA_EDMA_REQIPR(ch) (SATA_EDMA_BASE(ch) + 0x014) #define SATA_EDMA_REQOPR(ch) (SATA_EDMA_BASE(ch) + 0x018) #define SATA_EDMA_RESBAHR(ch) (SATA_EDMA_BASE(ch) + 0x01C) #define SATA_EDMA_RESIPR(ch) (SATA_EDMA_BASE(ch) + 0x020) #define SATA_EDMA_RESOPR(ch) (SATA_EDMA_BASE(ch) + 0x024) #define SATA_EDMA_CMD(ch) (SATA_EDMA_BASE(ch) + 0x028) #define SATA_EDMA_CMD_ENABLE (1 << 0) #define SATA_EDMA_CMD_DISABLE (1 << 1) #define SATA_EDMA_CMD_RESET (1 << 2) #define SATA_EDMA_STATUS(ch) (SATA_EDMA_BASE(ch) + 0x030) #define SATA_EDMA_STATUS_IDLE (1 << 7) /* Offset to extract input slot from REQIPR register */ #define SATA_EDMA_REQIS_OFS 5 /* Offset to extract input slot from RESOPR register */ #define SATA_EDMA_RESOS_OFS 3 /* * GPIO */ #define GPIO_DATA_OUT 0x00 #define GPIO_DATA_OUT_EN_CTRL 0x04 #define GPIO_BLINK_EN 0x08 #define GPIO_DATA_IN_POLAR 0x0c #define GPIO_DATA_IN 0x10 #define GPIO_INT_CAUSE 0x14 #define GPIO_INT_EDGE_MASK 0x18 #define GPIO_INT_LEV_MASK 0x1c #define GPIO(n) (1 << (n)) #define MV_GPIO_MAX_NPINS 64 #define MV_GPIO_IN_NONE 0x0 #define MV_GPIO_IN_POL_LOW (1 << 16) #define MV_GPIO_IN_IRQ_EDGE (2 << 16) #define MV_GPIO_IN_IRQ_LEVEL (4 << 16) #define MV_GPIO_IN_IRQ_DOUBLE_EDGE (8 << 16) #define MV_GPIO_IN_DEBOUNCE (16 << 16) #define MV_GPIO_OUT_NONE 0x0 #define MV_GPIO_OUT_BLINK 0x1 #define MV_GPIO_OUT_OPEN_DRAIN 0x2 #define MV_GPIO_OUT_OPEN_SRC 0x4 #define SAMPLE_AT_RESET_ARMADA38X 0x400 #define SAMPLE_AT_RESET_LO 0x30 #define SAMPLE_AT_RESET_HI 0x34 /* * Clocks */ #define TCLK_MASK_ARMADA38X 0x00008000 #define TCLK_SHIFT_ARMADA38X 15 #define TCLK_100MHZ 100000000 #define TCLK_125MHZ 125000000 #define TCLK_133MHZ 133333333 #define TCLK_150MHZ 150000000 #define TCLK_166MHZ 166666667 #define TCLK_200MHZ 200000000 #define TCLK_250MHZ 250000000 #define TCLK_300MHZ 300000000 #define TCLK_667MHZ 667000000 #define A38X_CPU_DDR_CLK_MASK 0x00007c00 #define A38X_CPU_DDR_CLK_SHIFT 10 /* * CPU Cache Configuration */ #define CPU_CONFIG 0x00000000 #define CPU_CONFIG_IC_PREF 0x00010000 #define CPU_CONFIG_DC_PREF 0x00020000 #define CPU_CONTROL 0x00000004 #define CPU_CONTROL_L2_SIZE 0x00200000 /* Only on Discovery */ #define CPU_CONTROL_L2_MODE 0x00020000 /* Only on Discovery */ #define CPU_L2_CONFIG 0x00000028 /* Only on Kirkwood */ #define CPU_L2_CONFIG_MODE 0x00000010 /* Only on Kirkwood */ /* * PCI Express port control (CPU Control registers) */ #define CPU_CONTROL_PCIE_DISABLE(n) (1 << (3 * (n))) /* * Vendor ID */ #define PCI_VENDORID_MRVL 0x11AB #define PCI_VENDORID_MRVL2 0x1B4B /* * Chip ID */ #define MV_DEV_88F6828 0x6828 #define MV_DEV_88F6820 0x6820 #define MV_DEV_88F6810 0x6810 #define MV_DEV_MV78230 0x7823 #define MV_DEV_MV78260 0x7826 #define MV_DEV_MV78460 0x7846 #define MV_DEV_FAMILY_MASK 0xff00 #define MV_DEV_ARMADA38X 0x6800 /* * Doorbell register control */ #define MV_DRBL_PCIE_TO_CPU 0 #define MV_DRBL_CPU_TO_PCIE 1 #define MV_DRBL_CAUSE(d,u) (0x10 * (u) + 0x8 * (d)) #define MV_DRBL_MASK(d,u) (0x10 * (u) + 0x8 * (d) + 0x4) #define MV_DRBL_MSG(m,d,u) (0x10 * (u) + 0x8 * (d) + 0x4 * (m) + 0x30) /* * SCU */ #define MV_SCU_BASE (MV_BASE + 0xc000) #define MV_SCU_REGS_LEN 0x100 #define MV_SCU_REG_CTRL 0x00 #define MV_SCU_REG_CONFIG 0x04 #define MV_SCU_ENABLE (1 << 0) #define MV_SCU_SL_L2_ENABLE (1 << 3) #define SCU_CFG_REG_NCPU_MASK 0x3 /* * PMSU */ #define MV_PMSU_BASE (MV_BASE + 0x22000) #define MV_PMSU_REGS_LEN 0x1000 #define PMSU_BOOT_ADDR_REDIRECT_OFFSET(cpu) (((cpu) * 0x100) + 0x124) /* * CPU RESET */ #define MV_CPU_RESET_BASE (MV_BASE + 0x20800) #define MV_CPU_RESET_REGS_LEN 0x8 #define CPU_RESET_OFFSET(cpu) ((cpu) * 0x8) #define CPU_RESET_ASSERT 0x1 #define MV_MBUS_CTRL_BASE (MV_BASE + 0x20420) #define MV_MBUS_CTRL_REGS_LEN 0x10 #endif /* _MVREG_H_ */