//===- LoopInterchange.cpp - Loop interchange pass-------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
//
// This Pass handles loop interchange transform.
// This pass interchanges loops to provide a more cache-friendly memory access
// patterns.
//
//===----------------------------------------------------------------------===//

#include "llvm/Transforms/Scalar/LoopInterchange.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SmallSet.h"
#include "llvm/ADT/SmallVector.h"
#include "llvm/ADT/Statistic.h"
#include "llvm/ADT/StringRef.h"
#include "llvm/ADT/StringSet.h"
#include "llvm/Analysis/DependenceAnalysis.h"
#include "llvm/Analysis/LoopCacheAnalysis.h"
#include "llvm/Analysis/LoopInfo.h"
#include "llvm/Analysis/LoopNestAnalysis.h"
#include "llvm/Analysis/LoopPass.h"
#include "llvm/Analysis/OptimizationRemarkEmitter.h"
#include "llvm/Analysis/ScalarEvolution.h"
#include "llvm/Analysis/ScalarEvolutionExpressions.h"
#include "llvm/IR/BasicBlock.h"
#include "llvm/IR/DiagnosticInfo.h"
#include "llvm/IR/Dominators.h"
#include "llvm/IR/Function.h"
#include "llvm/IR/InstrTypes.h"
#include "llvm/IR/Instruction.h"
#include "llvm/IR/Instructions.h"
#include "llvm/IR/User.h"
#include "llvm/IR/Value.h"
#include "llvm/Support/Casting.h"
#include "llvm/Support/CommandLine.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/raw_ostream.h"
#include "llvm/Transforms/Scalar/LoopPassManager.h"
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
#include "llvm/Transforms/Utils/LoopUtils.h"
#include <cassert>
#include <utility>
#include <vector>

using namespace llvm;

#define DEBUG_TYPE "loop-interchange"

STATISTIC(LoopsInterchanged, "Number of loops interchanged");

static cl::opt<int> LoopInterchangeCostThreshold(
    "loop-interchange-threshold", cl::init(0), cl::Hidden,
    cl::desc("Interchange if you gain more than this number"));

// Maximum number of load-stores that can be handled in the dependency matrix.
static cl::opt<unsigned int> MaxMemInstrCount(
    "loop-interchange-max-meminstr-count", cl::init(64), cl::Hidden,
    cl::desc(
        "Maximum number of load-store instructions that should be handled "
        "in the dependency matrix. Higher value may lead to more interchanges "
        "at the cost of compile-time"));

namespace {

using LoopVector = SmallVector<Loop *, 8>;

// TODO: Check if we can use a sparse matrix here.
using CharMatrix = std::vector<std::vector<char>>;

/// Types of rules used in profitability check.
enum class RuleTy {
  PerLoopCacheAnalysis,
  PerInstrOrderCost,
  ForVectorization,
};

} // end anonymous namespace

// Minimum loop depth supported.
static cl::opt<unsigned int> MinLoopNestDepth(
    "loop-interchange-min-loop-nest-depth", cl::init(2), cl::Hidden,
    cl::desc("Minimum depth of loop nest considered for the transform"));

// Maximum loop depth supported.
static cl::opt<unsigned int> MaxLoopNestDepth(
    "loop-interchange-max-loop-nest-depth", cl::init(10), cl::Hidden,
    cl::desc("Maximum depth of loop nest considered for the transform"));

// We prefer cache cost to vectorization by default.
static cl::list<RuleTy> Profitabilities(
    "loop-interchange-profitabilities", cl::ZeroOrMore,
    cl::MiscFlags::CommaSeparated, cl::Hidden,
    cl::desc("List of profitability heuristics to be used. They are applied in "
             "the given order"),
    cl::list_init<RuleTy>({RuleTy::PerLoopCacheAnalysis,
                           RuleTy::PerInstrOrderCost,
                           RuleTy::ForVectorization}),
    cl::values(clEnumValN(RuleTy::PerLoopCacheAnalysis, "cache",
                          "Prioritize loop cache cost"),
               clEnumValN(RuleTy::PerInstrOrderCost, "instorder",
                          "Prioritize the IVs order of each instruction"),
               clEnumValN(RuleTy::ForVectorization, "vectorize",
                          "Prioritize vectorization")));

#ifndef NDEBUG
static bool noDuplicateRules(ArrayRef<RuleTy> Rules) {
  SmallSet<RuleTy, 4> Set;
  for (RuleTy Rule : Rules)
    if (!Set.insert(Rule).second)
      return false;
  return true;
}

static void printDepMatrix(CharMatrix &DepMatrix) {
  for (auto &Row : DepMatrix) {
    for (auto D : Row)
      LLVM_DEBUG(dbgs() << D << " ");
    LLVM_DEBUG(dbgs() << "\n");
  }
}
#endif

static bool populateDependencyMatrix(CharMatrix &DepMatrix, unsigned Level,
                                     Loop *L, DependenceInfo *DI,
                                     ScalarEvolution *SE,
                                     OptimizationRemarkEmitter *ORE) {
  using ValueVector = SmallVector<Value *, 16>;

  ValueVector MemInstr;

  // For each block.
  for (BasicBlock *BB : L->blocks()) {
    // Scan the BB and collect legal loads and stores.
    for (Instruction &I : *BB) {
      if (!isa<Instruction>(I))
        return false;
      if (auto *Ld = dyn_cast<LoadInst>(&I)) {
        if (!Ld->isSimple())
          return false;
        MemInstr.push_back(&I);
      } else if (auto *St = dyn_cast<StoreInst>(&I)) {
        if (!St->isSimple())
          return false;
        MemInstr.push_back(&I);
      }
    }
  }

  LLVM_DEBUG(dbgs() << "Found " << MemInstr.size()
                    << " Loads and Stores to analyze\n");
  if (MemInstr.size() > MaxMemInstrCount) {
    LLVM_DEBUG(dbgs() << "The transform doesn't support more than "
                      << MaxMemInstrCount << " load/stores in a loop\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedLoop",
                                      L->getStartLoc(), L->getHeader())
             << "Number of loads/stores exceeded, the supported maximum "
                "can be increased with option "
                "-loop-interchange-maxmeminstr-count.";
    });
    return false;
  }
  ValueVector::iterator I, IE, J, JE;
  StringSet<> Seen;

  for (I = MemInstr.begin(), IE = MemInstr.end(); I != IE; ++I) {
    for (J = I, JE = MemInstr.end(); J != JE; ++J) {
      std::vector<char> Dep;
      Instruction *Src = cast<Instruction>(*I);
      Instruction *Dst = cast<Instruction>(*J);
      // Ignore Input dependencies.
      if (isa<LoadInst>(Src) && isa<LoadInst>(Dst))
        continue;
      // Track Output, Flow, and Anti dependencies.
      if (auto D = DI->depends(Src, Dst)) {
        assert(D->isOrdered() && "Expected an output, flow or anti dep.");
        // If the direction vector is negative, normalize it to
        // make it non-negative.
        if (D->normalize(SE))
          LLVM_DEBUG(dbgs() << "Negative dependence vector normalized.\n");
        LLVM_DEBUG(StringRef DepType =
                       D->isFlow() ? "flow" : D->isAnti() ? "anti" : "output";
                   dbgs() << "Found " << DepType
                          << " dependency between Src and Dst\n"
                          << " Src:" << *Src << "\n Dst:" << *Dst << '\n');
        unsigned Levels = D->getLevels();
        char Direction;
        for (unsigned II = 1; II <= Levels; ++II) {
          // `DVEntry::LE` is converted to `*`. This is because `LE` means `<`
          // or `=`, for which we don't have an equivalent representation, so
          // that the conservative approximation is necessary. The same goes for
          // `DVEntry::GE`.
          // TODO: Use of fine-grained expressions allows for more accurate
          // analysis.
          unsigned Dir = D->getDirection(II);
          if (Dir == Dependence::DVEntry::LT)
            Direction = '<';
          else if (Dir == Dependence::DVEntry::GT)
            Direction = '>';
          else if (Dir == Dependence::DVEntry::EQ)
            Direction = '=';
          else
            Direction = '*';
          Dep.push_back(Direction);
        }

        // If the Dependence object doesn't have any information, fill the
        // dependency vector with '*'.
        if (D->isConfused()) {
          assert(Dep.empty() && "Expected empty dependency vector");
          Dep.assign(Level, '*');
        }

        while (Dep.size() != Level) {
          Dep.push_back('I');
        }

        // Make sure we only add unique entries to the dependency matrix.
        if (Seen.insert(StringRef(Dep.data(), Dep.size())).second)
          DepMatrix.push_back(Dep);
      }
    }
  }

  return true;
}

// A loop is moved from index 'from' to an index 'to'. Update the Dependence
// matrix by exchanging the two columns.
static void interChangeDependencies(CharMatrix &DepMatrix, unsigned FromIndx,
                                    unsigned ToIndx) {
  for (auto &Row : DepMatrix)
    std::swap(Row[ToIndx], Row[FromIndx]);
}

// Check if a direction vector is lexicographically positive. Return true if it
// is positive, nullopt if it is "zero", otherwise false.
// [Theorem] A permutation of the loops in a perfect nest is legal if and only
// if the direction matrix, after the same permutation is applied to its
// columns, has no ">" direction as the leftmost non-"=" direction in any row.
static std::optional<bool>
isLexicographicallyPositive(ArrayRef<char> DV, unsigned Begin, unsigned End) {
  for (unsigned char Direction : DV.slice(Begin, End - Begin)) {
    if (Direction == '<')
      return true;
    if (Direction == '>' || Direction == '*')
      return false;
  }
  return std::nullopt;
}

// Checks if it is legal to interchange 2 loops.
static bool isLegalToInterChangeLoops(CharMatrix &DepMatrix,
                                      unsigned InnerLoopId,
                                      unsigned OuterLoopId) {
  unsigned NumRows = DepMatrix.size();
  std::vector<char> Cur;
  // For each row check if it is valid to interchange.
  for (unsigned Row = 0; Row < NumRows; ++Row) {
    // Create temporary DepVector check its lexicographical order
    // before and after swapping OuterLoop vs InnerLoop
    Cur = DepMatrix[Row];

    // If the surrounding loops already ensure that the direction vector is
    // lexicographically positive, nothing within the loop will be able to break
    // the dependence. In such a case we can skip the subsequent check.
    if (isLexicographicallyPositive(Cur, 0, OuterLoopId) == true)
      continue;

    // Check if the direction vector is lexicographically positive (or zero)
    // for both before/after exchanged.
    if (isLexicographicallyPositive(Cur, OuterLoopId, Cur.size()) == false)
      return false;
    std::swap(Cur[InnerLoopId], Cur[OuterLoopId]);
    if (isLexicographicallyPositive(Cur, OuterLoopId, Cur.size()) == false)
      return false;
  }
  return true;
}

static void populateWorklist(Loop &L, LoopVector &LoopList) {
  LLVM_DEBUG(dbgs() << "Calling populateWorklist on Func: "
                    << L.getHeader()->getParent()->getName() << " Loop: %"
                    << L.getHeader()->getName() << '\n');
  assert(LoopList.empty() && "LoopList should initially be empty!");
  Loop *CurrentLoop = &L;
  const std::vector<Loop *> *Vec = &CurrentLoop->getSubLoops();
  while (!Vec->empty()) {
    // The current loop has multiple subloops in it hence it is not tightly
    // nested.
    // Discard all loops above it added into Worklist.
    if (Vec->size() != 1) {
      LoopList = {};
      return;
    }

    LoopList.push_back(CurrentLoop);
    CurrentLoop = Vec->front();
    Vec = &CurrentLoop->getSubLoops();
  }
  LoopList.push_back(CurrentLoop);
}

static bool hasSupportedLoopDepth(ArrayRef<Loop *> LoopList,
                                  OptimizationRemarkEmitter &ORE) {
  unsigned LoopNestDepth = LoopList.size();
  if (LoopNestDepth < MinLoopNestDepth || LoopNestDepth > MaxLoopNestDepth) {
    LLVM_DEBUG(dbgs() << "Unsupported depth of loop nest " << LoopNestDepth
                      << ", the supported range is [" << MinLoopNestDepth
                      << ", " << MaxLoopNestDepth << "].\n");
    Loop *OuterLoop = LoopList.front();
    ORE.emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedLoopNestDepth",
                                      OuterLoop->getStartLoc(),
                                      OuterLoop->getHeader())
             << "Unsupported depth of loop nest, the supported range is ["
             << std::to_string(MinLoopNestDepth) << ", "
             << std::to_string(MaxLoopNestDepth) << "].\n";
    });
    return false;
  }
  return true;
}

static bool isComputableLoopNest(ScalarEvolution *SE,
                                 ArrayRef<Loop *> LoopList) {
  for (Loop *L : LoopList) {
    const SCEV *ExitCountOuter = SE->getBackedgeTakenCount(L);
    if (isa<SCEVCouldNotCompute>(ExitCountOuter)) {
      LLVM_DEBUG(dbgs() << "Couldn't compute backedge count\n");
      return false;
    }
    if (L->getNumBackEdges() != 1) {
      LLVM_DEBUG(dbgs() << "NumBackEdges is not equal to 1\n");
      return false;
    }
    if (!L->getExitingBlock()) {
      LLVM_DEBUG(dbgs() << "Loop doesn't have unique exit block\n");
      return false;
    }
  }
  return true;
}

namespace {

/// LoopInterchangeLegality checks if it is legal to interchange the loop.
class LoopInterchangeLegality {
public:
  LoopInterchangeLegality(Loop *Outer, Loop *Inner, ScalarEvolution *SE,
                          OptimizationRemarkEmitter *ORE)
      : OuterLoop(Outer), InnerLoop(Inner), SE(SE), ORE(ORE) {}

  /// Check if the loops can be interchanged.
  bool canInterchangeLoops(unsigned InnerLoopId, unsigned OuterLoopId,
                           CharMatrix &DepMatrix);

  /// Discover induction PHIs in the header of \p L. Induction
  /// PHIs are added to \p Inductions.
  bool findInductions(Loop *L, SmallVectorImpl<PHINode *> &Inductions);

  /// Check if the loop structure is understood. We do not handle triangular
  /// loops for now.
  bool isLoopStructureUnderstood();

  bool currentLimitations();

  const SmallPtrSetImpl<PHINode *> &getOuterInnerReductions() const {
    return OuterInnerReductions;
  }

  const ArrayRef<PHINode *> getInnerLoopInductions() const {
    return InnerLoopInductions;
  }

  ArrayRef<Instruction *> getHasNoWrapReductions() const {
    return HasNoWrapReductions;
  }

private:
  bool tightlyNested(Loop *Outer, Loop *Inner);
  bool containsUnsafeInstructions(BasicBlock *BB);

  /// Discover induction and reduction PHIs in the header of \p L. Induction
  /// PHIs are added to \p Inductions, reductions are added to
  /// OuterInnerReductions. When the outer loop is passed, the inner loop needs
  /// to be passed as \p InnerLoop.
  bool findInductionAndReductions(Loop *L,
                                  SmallVector<PHINode *, 8> &Inductions,
                                  Loop *InnerLoop);

  Loop *OuterLoop;
  Loop *InnerLoop;

  ScalarEvolution *SE;

  /// Interface to emit optimization remarks.
  OptimizationRemarkEmitter *ORE;

  /// Set of reduction PHIs taking part of a reduction across the inner and
  /// outer loop.
  SmallPtrSet<PHINode *, 4> OuterInnerReductions;

  /// Set of inner loop induction PHIs
  SmallVector<PHINode *, 8> InnerLoopInductions;

  /// Hold instructions that have nuw/nsw flags and involved in reductions,
  /// like integer addition/multiplication. Those flags must be dropped when
  /// interchanging the loops.
  SmallVector<Instruction *, 4> HasNoWrapReductions;
};

/// Manages information utilized by the profitability check for cache. The main
/// purpose of this class is to delay the computation of CacheCost until it is
/// actually needed.
class CacheCostManager {
  Loop *OutermostLoop;
  LoopStandardAnalysisResults *AR;
  DependenceInfo *DI;

  /// CacheCost for \ref OutermostLoop. Once it is computed, it is cached. Note
  /// that the result can be nullptr.
  std::optional<std::unique_ptr<CacheCost>> CC;

  /// Maps each loop to an index representing the optimal position within the
  /// loop-nest, as determined by the cache cost analysis.
  DenseMap<const Loop *, unsigned> CostMap;

  void computeIfUnitinialized();

public:
  CacheCostManager(Loop *OutermostLoop, LoopStandardAnalysisResults *AR,
                   DependenceInfo *DI)
      : OutermostLoop(OutermostLoop), AR(AR), DI(DI) {}
  CacheCost *getCacheCost();
  const DenseMap<const Loop *, unsigned> &getCostMap();
};

/// LoopInterchangeProfitability checks if it is profitable to interchange the
/// loop.
class LoopInterchangeProfitability {
public:
  LoopInterchangeProfitability(Loop *Outer, Loop *Inner, ScalarEvolution *SE,
                               OptimizationRemarkEmitter *ORE)
      : OuterLoop(Outer), InnerLoop(Inner), SE(SE), ORE(ORE) {}

  /// Check if the loop interchange is profitable.
  bool isProfitable(const Loop *InnerLoop, const Loop *OuterLoop,
                    unsigned InnerLoopId, unsigned OuterLoopId,
                    CharMatrix &DepMatrix, CacheCostManager &CCM);

private:
  int getInstrOrderCost();
  std::optional<bool> isProfitablePerLoopCacheAnalysis(
      const DenseMap<const Loop *, unsigned> &CostMap, CacheCost *CC);
  std::optional<bool> isProfitablePerInstrOrderCost();
  std::optional<bool> isProfitableForVectorization(unsigned InnerLoopId,
                                                   unsigned OuterLoopId,
                                                   CharMatrix &DepMatrix);
  Loop *OuterLoop;
  Loop *InnerLoop;

  /// Scev analysis.
  ScalarEvolution *SE;

  /// Interface to emit optimization remarks.
  OptimizationRemarkEmitter *ORE;
};

/// LoopInterchangeTransform interchanges the loop.
class LoopInterchangeTransform {
public:
  LoopInterchangeTransform(Loop *Outer, Loop *Inner, ScalarEvolution *SE,
                           LoopInfo *LI, DominatorTree *DT,
                           const LoopInterchangeLegality &LIL)
      : OuterLoop(Outer), InnerLoop(Inner), SE(SE), LI(LI), DT(DT), LIL(LIL) {}

  /// Interchange OuterLoop and InnerLoop.
  bool transform(ArrayRef<Instruction *> DropNoWrapInsts);
  void restructureLoops(Loop *NewInner, Loop *NewOuter,
                        BasicBlock *OrigInnerPreHeader,
                        BasicBlock *OrigOuterPreHeader);
  void removeChildLoop(Loop *OuterLoop, Loop *InnerLoop);

private:
  bool adjustLoopLinks();
  bool adjustLoopBranches();

  Loop *OuterLoop;
  Loop *InnerLoop;

  /// Scev analysis.
  ScalarEvolution *SE;

  LoopInfo *LI;
  DominatorTree *DT;

  const LoopInterchangeLegality &LIL;
};

struct LoopInterchange {
  ScalarEvolution *SE = nullptr;
  LoopInfo *LI = nullptr;
  DependenceInfo *DI = nullptr;
  DominatorTree *DT = nullptr;
  LoopStandardAnalysisResults *AR = nullptr;

  /// Interface to emit optimization remarks.
  OptimizationRemarkEmitter *ORE;

  LoopInterchange(ScalarEvolution *SE, LoopInfo *LI, DependenceInfo *DI,
                  DominatorTree *DT, LoopStandardAnalysisResults *AR,
                  OptimizationRemarkEmitter *ORE)
      : SE(SE), LI(LI), DI(DI), DT(DT), AR(AR), ORE(ORE) {}

  bool run(Loop *L) {
    if (L->getParentLoop())
      return false;
    SmallVector<Loop *, 8> LoopList;
    populateWorklist(*L, LoopList);
    return processLoopList(LoopList);
  }

  bool run(LoopNest &LN) {
    SmallVector<Loop *, 8> LoopList(LN.getLoops());
    for (unsigned I = 1; I < LoopList.size(); ++I)
      if (LoopList[I]->getParentLoop() != LoopList[I - 1])
        return false;
    return processLoopList(LoopList);
  }

  unsigned selectLoopForInterchange(ArrayRef<Loop *> LoopList) {
    // TODO: Add a better heuristic to select the loop to be interchanged based
    // on the dependence matrix. Currently we select the innermost loop.
    return LoopList.size() - 1;
  }

  bool processLoopList(SmallVectorImpl<Loop *> &LoopList) {
    bool Changed = false;

    // Ensure proper loop nest depth.
    assert(hasSupportedLoopDepth(LoopList, *ORE) &&
           "Unsupported depth of loop nest.");

    unsigned LoopNestDepth = LoopList.size();

    LLVM_DEBUG(dbgs() << "Processing LoopList of size = " << LoopNestDepth
                      << "\n");

    CharMatrix DependencyMatrix;
    Loop *OuterMostLoop = *(LoopList.begin());
    if (!populateDependencyMatrix(DependencyMatrix, LoopNestDepth,
                                  OuterMostLoop, DI, SE, ORE)) {
      LLVM_DEBUG(dbgs() << "Populating dependency matrix failed\n");
      return false;
    }

    LLVM_DEBUG(dbgs() << "Dependency matrix before interchange:\n";
               printDepMatrix(DependencyMatrix));

    // Get the Outermost loop exit.
    BasicBlock *LoopNestExit = OuterMostLoop->getExitBlock();
    if (!LoopNestExit) {
      LLVM_DEBUG(dbgs() << "OuterMostLoop needs an unique exit block");
      return false;
    }

    unsigned SelecLoopId = selectLoopForInterchange(LoopList);
    CacheCostManager CCM(LoopList[0], AR, DI);
    // We try to achieve the globally optimal memory access for the loopnest,
    // and do interchange based on a bubble-sort fasion. We start from
    // the innermost loop, move it outwards to the best possible position
    // and repeat this process.
    for (unsigned j = SelecLoopId; j > 0; j--) {
      bool ChangedPerIter = false;
      for (unsigned i = SelecLoopId; i > SelecLoopId - j; i--) {
        bool Interchanged =
            processLoop(LoopList, i, i - 1, DependencyMatrix, CCM);
        ChangedPerIter |= Interchanged;
        Changed |= Interchanged;
      }
      // Early abort if there was no interchange during an entire round of
      // moving loops outwards.
      if (!ChangedPerIter)
        break;
    }
    return Changed;
  }

  bool processLoop(SmallVectorImpl<Loop *> &LoopList, unsigned InnerLoopId,
                   unsigned OuterLoopId,
                   std::vector<std::vector<char>> &DependencyMatrix,
                   CacheCostManager &CCM) {
    Loop *OuterLoop = LoopList[OuterLoopId];
    Loop *InnerLoop = LoopList[InnerLoopId];
    LLVM_DEBUG(dbgs() << "Processing InnerLoopId = " << InnerLoopId
                      << " and OuterLoopId = " << OuterLoopId << "\n");
    LoopInterchangeLegality LIL(OuterLoop, InnerLoop, SE, ORE);
    if (!LIL.canInterchangeLoops(InnerLoopId, OuterLoopId, DependencyMatrix)) {
      LLVM_DEBUG(dbgs() << "Not interchanging loops. Cannot prove legality.\n");
      return false;
    }
    LLVM_DEBUG(dbgs() << "Loops are legal to interchange\n");
    LoopInterchangeProfitability LIP(OuterLoop, InnerLoop, SE, ORE);
    if (!LIP.isProfitable(InnerLoop, OuterLoop, InnerLoopId, OuterLoopId,
                          DependencyMatrix, CCM)) {
      LLVM_DEBUG(dbgs() << "Interchanging loops not profitable.\n");
      return false;
    }

    ORE->emit([&]() {
      return OptimizationRemark(DEBUG_TYPE, "Interchanged",
                                InnerLoop->getStartLoc(),
                                InnerLoop->getHeader())
             << "Loop interchanged with enclosing loop.";
    });

    LoopInterchangeTransform LIT(OuterLoop, InnerLoop, SE, LI, DT, LIL);
    LIT.transform(LIL.getHasNoWrapReductions());
    LLVM_DEBUG(dbgs() << "Loops interchanged.\n");
    LoopsInterchanged++;

    llvm::formLCSSARecursively(*OuterLoop, *DT, LI, SE);

    // Loops interchanged, update LoopList accordingly.
    std::swap(LoopList[OuterLoopId], LoopList[InnerLoopId]);
    // Update the DependencyMatrix
    interChangeDependencies(DependencyMatrix, InnerLoopId, OuterLoopId);

    LLVM_DEBUG(dbgs() << "Dependency matrix after interchange:\n";
               printDepMatrix(DependencyMatrix));

    return true;
  }
};

} // end anonymous namespace

bool LoopInterchangeLegality::containsUnsafeInstructions(BasicBlock *BB) {
  return any_of(*BB, [](const Instruction &I) {
    return I.mayHaveSideEffects() || I.mayReadFromMemory();
  });
}

bool LoopInterchangeLegality::tightlyNested(Loop *OuterLoop, Loop *InnerLoop) {
  BasicBlock *OuterLoopHeader = OuterLoop->getHeader();
  BasicBlock *InnerLoopPreHeader = InnerLoop->getLoopPreheader();
  BasicBlock *OuterLoopLatch = OuterLoop->getLoopLatch();

  LLVM_DEBUG(dbgs() << "Checking if loops are tightly nested\n");

  // A perfectly nested loop will not have any branch in between the outer and
  // inner block i.e. outer header will branch to either inner preheader and
  // outerloop latch.
  BranchInst *OuterLoopHeaderBI =
      dyn_cast<BranchInst>(OuterLoopHeader->getTerminator());
  if (!OuterLoopHeaderBI)
    return false;

  for (BasicBlock *Succ : successors(OuterLoopHeaderBI))
    if (Succ != InnerLoopPreHeader && Succ != InnerLoop->getHeader() &&
        Succ != OuterLoopLatch)
      return false;

  LLVM_DEBUG(dbgs() << "Checking instructions in Loop header and Loop latch\n");
  // We do not have any basic block in between now make sure the outer header
  // and outer loop latch doesn't contain any unsafe instructions.
  if (containsUnsafeInstructions(OuterLoopHeader) ||
      containsUnsafeInstructions(OuterLoopLatch))
    return false;

  // Also make sure the inner loop preheader does not contain any unsafe
  // instructions. Note that all instructions in the preheader will be moved to
  // the outer loop header when interchanging.
  if (InnerLoopPreHeader != OuterLoopHeader &&
      containsUnsafeInstructions(InnerLoopPreHeader))
    return false;

  BasicBlock *InnerLoopExit = InnerLoop->getExitBlock();
  // Ensure the inner loop exit block flows to the outer loop latch possibly
  // through empty blocks.
  const BasicBlock &SuccInner =
      LoopNest::skipEmptyBlockUntil(InnerLoopExit, OuterLoopLatch);
  if (&SuccInner != OuterLoopLatch) {
    LLVM_DEBUG(dbgs() << "Inner loop exit block " << *InnerLoopExit
                      << " does not lead to the outer loop latch.\n";);
    return false;
  }
  // The inner loop exit block does flow to the outer loop latch and not some
  // other BBs, now make sure it contains safe instructions, since it will be
  // moved into the (new) inner loop after interchange.
  if (containsUnsafeInstructions(InnerLoopExit))
    return false;

  LLVM_DEBUG(dbgs() << "Loops are perfectly nested\n");
  // We have a perfect loop nest.
  return true;
}

bool LoopInterchangeLegality::isLoopStructureUnderstood() {
  BasicBlock *InnerLoopPreheader = InnerLoop->getLoopPreheader();
  for (PHINode *InnerInduction : InnerLoopInductions) {
    unsigned Num = InnerInduction->getNumOperands();
    for (unsigned i = 0; i < Num; ++i) {
      Value *Val = InnerInduction->getOperand(i);
      if (isa<Constant>(Val))
        continue;
      Instruction *I = dyn_cast<Instruction>(Val);
      if (!I)
        return false;
      // TODO: Handle triangular loops.
      // e.g. for(int i=0;i<N;i++)
      //        for(int j=i;j<N;j++)
      unsigned IncomBlockIndx = PHINode::getIncomingValueNumForOperand(i);
      if (InnerInduction->getIncomingBlock(IncomBlockIndx) ==
              InnerLoopPreheader &&
          !OuterLoop->isLoopInvariant(I)) {
        return false;
      }
    }
  }

  // TODO: Handle triangular loops of another form.
  // e.g. for(int i=0;i<N;i++)
  //        for(int j=0;j<i;j++)
  // or,
  //      for(int i=0;i<N;i++)
  //        for(int j=0;j*i<N;j++)
  BasicBlock *InnerLoopLatch = InnerLoop->getLoopLatch();
  BranchInst *InnerLoopLatchBI =
      dyn_cast<BranchInst>(InnerLoopLatch->getTerminator());
  if (!InnerLoopLatchBI->isConditional())
    return false;
  if (CmpInst *InnerLoopCmp =
          dyn_cast<CmpInst>(InnerLoopLatchBI->getCondition())) {
    Value *Op0 = InnerLoopCmp->getOperand(0);
    Value *Op1 = InnerLoopCmp->getOperand(1);

    // LHS and RHS of the inner loop exit condition, e.g.,
    // in "for(int j=0;j<i;j++)", LHS is j and RHS is i.
    Value *Left = nullptr;
    Value *Right = nullptr;

    // Check if V only involves inner loop induction variable.
    // Return true if V is InnerInduction, or a cast from
    // InnerInduction, or a binary operator that involves
    // InnerInduction and a constant.
    std::function<bool(Value *)> IsPathToInnerIndVar;
    IsPathToInnerIndVar = [this, &IsPathToInnerIndVar](const Value *V) -> bool {
      if (llvm::is_contained(InnerLoopInductions, V))
        return true;
      if (isa<Constant>(V))
        return true;
      const Instruction *I = dyn_cast<Instruction>(V);
      if (!I)
        return false;
      if (isa<CastInst>(I))
        return IsPathToInnerIndVar(I->getOperand(0));
      if (isa<BinaryOperator>(I))
        return IsPathToInnerIndVar(I->getOperand(0)) &&
               IsPathToInnerIndVar(I->getOperand(1));
      return false;
    };

    // In case of multiple inner loop indvars, it is okay if LHS and RHS
    // are both inner indvar related variables.
    if (IsPathToInnerIndVar(Op0) && IsPathToInnerIndVar(Op1))
      return true;

    // Otherwise we check if the cmp instruction compares an inner indvar
    // related variable (Left) with a outer loop invariant (Right).
    if (IsPathToInnerIndVar(Op0) && !isa<Constant>(Op0)) {
      Left = Op0;
      Right = Op1;
    } else if (IsPathToInnerIndVar(Op1) && !isa<Constant>(Op1)) {
      Left = Op1;
      Right = Op0;
    }

    if (Left == nullptr)
      return false;

    const SCEV *S = SE->getSCEV(Right);
    if (!SE->isLoopInvariant(S, OuterLoop))
      return false;
  }

  return true;
}

// If SV is a LCSSA PHI node with a single incoming value, return the incoming
// value.
static Value *followLCSSA(Value *SV) {
  PHINode *PHI = dyn_cast<PHINode>(SV);
  if (!PHI)
    return SV;

  if (PHI->getNumIncomingValues() != 1)
    return SV;
  return followLCSSA(PHI->getIncomingValue(0));
}

// Check V's users to see if it is involved in a reduction in L.
static PHINode *
findInnerReductionPhi(Loop *L, Value *V,
                      SmallVectorImpl<Instruction *> &HasNoWrapInsts) {
  // Reduction variables cannot be constants.
  if (isa<Constant>(V))
    return nullptr;

  for (Value *User : V->users()) {
    if (PHINode *PHI = dyn_cast<PHINode>(User)) {
      if (PHI->getNumIncomingValues() == 1)
        continue;
      RecurrenceDescriptor RD;
      if (RecurrenceDescriptor::isReductionPHI(PHI, L, RD)) {
        // Detect floating point reduction only when it can be reordered.
        if (RD.getExactFPMathInst() != nullptr)
          return nullptr;

        RecurKind RK = RD.getRecurrenceKind();
        switch (RK) {
        case RecurKind::Or:
        case RecurKind::And:
        case RecurKind::Xor:
        case RecurKind::SMin:
        case RecurKind::SMax:
        case RecurKind::UMin:
        case RecurKind::UMax:
        case RecurKind::FAdd:
        case RecurKind::FMul:
        case RecurKind::FMin:
        case RecurKind::FMax:
        case RecurKind::FMinimum:
        case RecurKind::FMaximum:
        case RecurKind::FMinimumNum:
        case RecurKind::FMaximumNum:
        case RecurKind::FMulAdd:
        case RecurKind::AnyOf:
          return PHI;

        // Change the order of integer addition/multiplication may change the
        // semantics. Consider the following case:
        //
        //  int A[2][2] = {{ INT_MAX, INT_MAX }, { INT_MIN, INT_MIN }};
        //  int sum = 0;
        //  for (int i = 0; i < 2; i++)
        //    for (int j = 0; j < 2; j++)
        //      sum += A[j][i];
        //
        // If the above loops are exchanged, the addition will cause an
        // overflow. To prevent this, we must drop the nuw/nsw flags from the
        // addition/multiplication instructions when we actually exchanges the
        // loops.
        case RecurKind::Add:
        case RecurKind::Mul: {
          unsigned OpCode = RecurrenceDescriptor::getOpcode(RK);
          SmallVector<Instruction *, 4> Ops = RD.getReductionOpChain(PHI, L);

          // Bail out when we fail to collect reduction instructions chain.
          if (Ops.empty())
            return nullptr;

          for (Instruction *I : Ops) {
            assert(I->getOpcode() == OpCode &&
                   "Expected the instruction to be the reduction operation");

            // If the instruction has nuw/nsw flags, we must drop them when the
            // transformation is actually performed.
            if (I->hasNoSignedWrap() || I->hasNoUnsignedWrap())
              HasNoWrapInsts.push_back(I);
          }
          return PHI;
        }

        default:
          return nullptr;
        }
      }
      return nullptr;
    }
  }

  return nullptr;
}

bool LoopInterchangeLegality::findInductionAndReductions(
    Loop *L, SmallVector<PHINode *, 8> &Inductions, Loop *InnerLoop) {
  if (!L->getLoopLatch() || !L->getLoopPredecessor())
    return false;
  for (PHINode &PHI : L->getHeader()->phis()) {
    InductionDescriptor ID;
    if (InductionDescriptor::isInductionPHI(&PHI, L, SE, ID))
      Inductions.push_back(&PHI);
    else {
      // PHIs in inner loops need to be part of a reduction in the outer loop,
      // discovered when checking the PHIs of the outer loop earlier.
      if (!InnerLoop) {
        if (!OuterInnerReductions.count(&PHI)) {
          LLVM_DEBUG(dbgs() << "Inner loop PHI is not part of reductions "
                               "across the outer loop.\n");
          return false;
        }
      } else {
        assert(PHI.getNumIncomingValues() == 2 &&
               "Phis in loop header should have exactly 2 incoming values");
        // Check if we have a PHI node in the outer loop that has a reduction
        // result from the inner loop as an incoming value.
        Value *V = followLCSSA(PHI.getIncomingValueForBlock(L->getLoopLatch()));
        PHINode *InnerRedPhi =
            findInnerReductionPhi(InnerLoop, V, HasNoWrapReductions);
        if (!InnerRedPhi ||
            !llvm::is_contained(InnerRedPhi->incoming_values(), &PHI)) {
          LLVM_DEBUG(
              dbgs()
              << "Failed to recognize PHI as an induction or reduction.\n");
          return false;
        }
        OuterInnerReductions.insert(&PHI);
        OuterInnerReductions.insert(InnerRedPhi);
      }
    }
  }
  return true;
}

// This function indicates the current limitations in the transform as a result
// of which we do not proceed.
bool LoopInterchangeLegality::currentLimitations() {
  BasicBlock *InnerLoopLatch = InnerLoop->getLoopLatch();

  // transform currently expects the loop latches to also be the exiting
  // blocks.
  if (InnerLoop->getExitingBlock() != InnerLoopLatch ||
      OuterLoop->getExitingBlock() != OuterLoop->getLoopLatch() ||
      !isa<BranchInst>(InnerLoopLatch->getTerminator()) ||
      !isa<BranchInst>(OuterLoop->getLoopLatch()->getTerminator())) {
    LLVM_DEBUG(
        dbgs() << "Loops where the latch is not the exiting block are not"
               << " supported currently.\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "ExitingNotLatch",
                                      OuterLoop->getStartLoc(),
                                      OuterLoop->getHeader())
             << "Loops where the latch is not the exiting block cannot be"
                " interchange currently.";
    });
    return true;
  }

  SmallVector<PHINode *, 8> Inductions;
  if (!findInductionAndReductions(OuterLoop, Inductions, InnerLoop)) {
    LLVM_DEBUG(
        dbgs() << "Only outer loops with induction or reduction PHI nodes "
               << "are supported currently.\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedPHIOuter",
                                      OuterLoop->getStartLoc(),
                                      OuterLoop->getHeader())
             << "Only outer loops with induction or reduction PHI nodes can be"
                " interchanged currently.";
    });
    return true;
  }

  Inductions.clear();
  // For multi-level loop nests, make sure that all phi nodes for inner loops
  // at all levels can be recognized as a induction or reduction phi. Bail out
  // if a phi node at a certain nesting level cannot be properly recognized.
  Loop *CurLevelLoop = OuterLoop;
  while (!CurLevelLoop->getSubLoops().empty()) {
    // We already made sure that the loop nest is tightly nested.
    CurLevelLoop = CurLevelLoop->getSubLoops().front();
    if (!findInductionAndReductions(CurLevelLoop, Inductions, nullptr)) {
      LLVM_DEBUG(
          dbgs() << "Only inner loops with induction or reduction PHI nodes "
                << "are supported currently.\n");
      ORE->emit([&]() {
        return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedPHIInner",
                                        CurLevelLoop->getStartLoc(),
                                        CurLevelLoop->getHeader())
              << "Only inner loops with induction or reduction PHI nodes can be"
                  " interchange currently.";
      });
      return true;
    }
  }

  // TODO: Triangular loops are not handled for now.
  if (!isLoopStructureUnderstood()) {
    LLVM_DEBUG(dbgs() << "Loop structure not understood by pass\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedStructureInner",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Inner loop structure not understood currently.";
    });
    return true;
  }

  return false;
}

bool LoopInterchangeLegality::findInductions(
    Loop *L, SmallVectorImpl<PHINode *> &Inductions) {
  for (PHINode &PHI : L->getHeader()->phis()) {
    InductionDescriptor ID;
    if (InductionDescriptor::isInductionPHI(&PHI, L, SE, ID))
      Inductions.push_back(&PHI);
  }
  return !Inductions.empty();
}

// We currently only support LCSSA PHI nodes in the inner loop exit, if their
// users are either reduction PHIs or PHIs outside the outer loop (which means
// the we are only interested in the final value after the loop).
static bool
areInnerLoopExitPHIsSupported(Loop *InnerL, Loop *OuterL,
                              SmallPtrSetImpl<PHINode *> &Reductions) {
  BasicBlock *InnerExit = OuterL->getUniqueExitBlock();
  for (PHINode &PHI : InnerExit->phis()) {
    // Reduction lcssa phi will have only 1 incoming block that from loop latch.
    if (PHI.getNumIncomingValues() > 1)
      return false;
    if (any_of(PHI.users(), [&Reductions, OuterL](User *U) {
          PHINode *PN = dyn_cast<PHINode>(U);
          return !PN ||
                 (!Reductions.count(PN) && OuterL->contains(PN->getParent()));
        })) {
      return false;
    }
  }
  return true;
}

// We currently support LCSSA PHI nodes in the outer loop exit, if their
// incoming values do not come from the outer loop latch or if the
// outer loop latch has a single predecessor. In that case, the value will
// be available if both the inner and outer loop conditions are true, which
// will still be true after interchanging. If we have multiple predecessor,
// that may not be the case, e.g. because the outer loop latch may be executed
// if the inner loop is not executed.
static bool areOuterLoopExitPHIsSupported(Loop *OuterLoop, Loop *InnerLoop) {
  BasicBlock *LoopNestExit = OuterLoop->getUniqueExitBlock();
  for (PHINode &PHI : LoopNestExit->phis()) {
    for (Value *Incoming : PHI.incoming_values()) {
      Instruction *IncomingI = dyn_cast<Instruction>(Incoming);
      if (!IncomingI || IncomingI->getParent() != OuterLoop->getLoopLatch())
        continue;

      // The incoming value is defined in the outer loop latch. Currently we
      // only support that in case the outer loop latch has a single predecessor.
      // This guarantees that the outer loop latch is executed if and only if
      // the inner loop is executed (because tightlyNested() guarantees that the
      // outer loop header only branches to the inner loop or the outer loop
      // latch).
      // FIXME: We could weaken this logic and allow multiple predecessors,
      //        if the values are produced outside the loop latch. We would need
      //        additional logic to update the PHI nodes in the exit block as
      //        well.
      if (OuterLoop->getLoopLatch()->getUniquePredecessor() == nullptr)
        return false;
    }
  }
  return true;
}

// In case of multi-level nested loops, it may occur that lcssa phis exist in
// the latch of InnerLoop, i.e., when defs of the incoming values are further
// inside the loopnest. Sometimes those incoming values are not available
// after interchange, since the original inner latch will become the new outer
// latch which may have predecessor paths that do not include those incoming
// values.
// TODO: Handle transformation of lcssa phis in the InnerLoop latch in case of
// multi-level loop nests.
static bool areInnerLoopLatchPHIsSupported(Loop *OuterLoop, Loop *InnerLoop) {
  if (InnerLoop->getSubLoops().empty())
    return true;
  // If the original outer latch has only one predecessor, then values defined
  // further inside the looploop, e.g., in the innermost loop, will be available
  // at the new outer latch after interchange.
  if (OuterLoop->getLoopLatch()->getUniquePredecessor() != nullptr)
    return true;

  // The outer latch has more than one predecessors, i.e., the inner
  // exit and the inner header.
  // PHI nodes in the inner latch are lcssa phis where the incoming values
  // are defined further inside the loopnest. Check if those phis are used
  // in the original inner latch. If that is the case then bail out since
  // those incoming values may not be available at the new outer latch.
  BasicBlock *InnerLoopLatch = InnerLoop->getLoopLatch();
  for (PHINode &PHI : InnerLoopLatch->phis()) {
    for (auto *U : PHI.users()) {
      Instruction *UI = cast<Instruction>(U);
      if (InnerLoopLatch == UI->getParent())
        return false;
    }
  }
  return true;
}

bool LoopInterchangeLegality::canInterchangeLoops(unsigned InnerLoopId,
                                                  unsigned OuterLoopId,
                                                  CharMatrix &DepMatrix) {
  if (!isLegalToInterChangeLoops(DepMatrix, InnerLoopId, OuterLoopId)) {
    LLVM_DEBUG(dbgs() << "Failed interchange InnerLoopId = " << InnerLoopId
                      << " and OuterLoopId = " << OuterLoopId
                      << " due to dependence\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "Dependence",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Cannot interchange loops due to dependences.";
    });
    return false;
  }
  // Check if outer and inner loop contain legal instructions only.
  for (auto *BB : OuterLoop->blocks())
    for (Instruction &I : BB->instructionsWithoutDebug())
      if (CallInst *CI = dyn_cast<CallInst>(&I)) {
        // readnone functions do not prevent interchanging.
        if (CI->onlyWritesMemory())
          continue;
        LLVM_DEBUG(
            dbgs() << "Loops with call instructions cannot be interchanged "
                   << "safely.");
        ORE->emit([&]() {
          return OptimizationRemarkMissed(DEBUG_TYPE, "CallInst",
                                          CI->getDebugLoc(),
                                          CI->getParent())
                 << "Cannot interchange loops due to call instruction.";
        });

        return false;
      }

  if (!findInductions(InnerLoop, InnerLoopInductions)) {
    LLVM_DEBUG(dbgs() << "Could not find inner loop induction variables.\n");
    return false;
  }

  if (!areInnerLoopLatchPHIsSupported(OuterLoop, InnerLoop)) {
    LLVM_DEBUG(dbgs() << "Found unsupported PHI nodes in inner loop latch.\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedInnerLatchPHI",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Cannot interchange loops because unsupported PHI nodes found "
                "in inner loop latch.";
    });
    return false;
  }

  // TODO: The loops could not be interchanged due to current limitations in the
  // transform module.
  if (currentLimitations()) {
    LLVM_DEBUG(dbgs() << "Not legal because of current transform limitation\n");
    return false;
  }

  // Check if the loops are tightly nested.
  if (!tightlyNested(OuterLoop, InnerLoop)) {
    LLVM_DEBUG(dbgs() << "Loops not tightly nested\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "NotTightlyNested",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Cannot interchange loops because they are not tightly "
                "nested.";
    });
    return false;
  }

  if (!areInnerLoopExitPHIsSupported(OuterLoop, InnerLoop,
                                     OuterInnerReductions)) {
    LLVM_DEBUG(dbgs() << "Found unsupported PHI nodes in inner loop exit.\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedExitPHI",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Found unsupported PHI node in loop exit.";
    });
    return false;
  }

  if (!areOuterLoopExitPHIsSupported(OuterLoop, InnerLoop)) {
    LLVM_DEBUG(dbgs() << "Found unsupported PHI nodes in outer loop exit.\n");
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "UnsupportedExitPHI",
                                      OuterLoop->getStartLoc(),
                                      OuterLoop->getHeader())
             << "Found unsupported PHI node in loop exit.";
    });
    return false;
  }

  return true;
}

void CacheCostManager::computeIfUnitinialized() {
  if (CC.has_value())
    return;

  LLVM_DEBUG(dbgs() << "Compute CacheCost.\n");
  CC = CacheCost::getCacheCost(*OutermostLoop, *AR, *DI);
  // Obtain the loop vector returned from loop cache analysis beforehand,
  // and put each <Loop, index> pair into a map for constant time query
  // later. Indices in loop vector reprsent the optimal order of the
  // corresponding loop, e.g., given a loopnest with depth N, index 0
  // indicates the loop should be placed as the outermost loop and index N
  // indicates the loop should be placed as the innermost loop.
  //
  // For the old pass manager CacheCost would be null.
  if (*CC != nullptr)
    for (const auto &[Idx, Cost] : enumerate((*CC)->getLoopCosts()))
      CostMap[Cost.first] = Idx;
}

CacheCost *CacheCostManager::getCacheCost() {
  computeIfUnitinialized();
  return CC->get();
}

const DenseMap<const Loop *, unsigned> &CacheCostManager::getCostMap() {
  computeIfUnitinialized();
  return CostMap;
}

int LoopInterchangeProfitability::getInstrOrderCost() {
  unsigned GoodOrder, BadOrder;
  BadOrder = GoodOrder = 0;
  for (BasicBlock *BB : InnerLoop->blocks()) {
    for (Instruction &Ins : *BB) {
      if (const GetElementPtrInst *GEP = dyn_cast<GetElementPtrInst>(&Ins)) {
        bool FoundInnerInduction = false;
        bool FoundOuterInduction = false;
        for (Value *Op : GEP->operands()) {
          // Skip operands that are not SCEV-able.
          if (!SE->isSCEVable(Op->getType()))
            continue;

          const SCEV *OperandVal = SE->getSCEV(Op);
          const SCEVAddRecExpr *AR = dyn_cast<SCEVAddRecExpr>(OperandVal);
          if (!AR)
            continue;

          // If we find the inner induction after an outer induction e.g.
          // for(int i=0;i<N;i++)
          //   for(int j=0;j<N;j++)
          //     A[i][j] = A[i-1][j-1]+k;
          // then it is a good order.
          if (AR->getLoop() == InnerLoop) {
            // We found an InnerLoop induction after OuterLoop induction. It is
            // a good order.
            FoundInnerInduction = true;
            if (FoundOuterInduction) {
              GoodOrder++;
              break;
            }
          }
          // If we find the outer induction after an inner induction e.g.
          // for(int i=0;i<N;i++)
          //   for(int j=0;j<N;j++)
          //     A[j][i] = A[j-1][i-1]+k;
          // then it is a bad order.
          if (AR->getLoop() == OuterLoop) {
            // We found an OuterLoop induction after InnerLoop induction. It is
            // a bad order.
            FoundOuterInduction = true;
            if (FoundInnerInduction) {
              BadOrder++;
              break;
            }
          }
        }
      }
    }
  }
  return GoodOrder - BadOrder;
}

std::optional<bool>
LoopInterchangeProfitability::isProfitablePerLoopCacheAnalysis(
    const DenseMap<const Loop *, unsigned> &CostMap, CacheCost *CC) {
  // This is the new cost model returned from loop cache analysis.
  // A smaller index means the loop should be placed an outer loop, and vice
  // versa.
  auto InnerLoopIt = CostMap.find(InnerLoop);
  if (InnerLoopIt == CostMap.end())
    return std::nullopt;
  auto OuterLoopIt = CostMap.find(OuterLoop);
  if (OuterLoopIt == CostMap.end())
    return std::nullopt;

  if (CC->getLoopCost(*OuterLoop) == CC->getLoopCost(*InnerLoop))
    return std::nullopt;
  unsigned InnerIndex = InnerLoopIt->second;
  unsigned OuterIndex = OuterLoopIt->second;
  LLVM_DEBUG(dbgs() << "InnerIndex = " << InnerIndex
                    << ", OuterIndex = " << OuterIndex << "\n");
  assert(InnerIndex != OuterIndex && "CostMap should assign unique "
                                     "numbers to each loop");
  return std::optional<bool>(InnerIndex < OuterIndex);
}

std::optional<bool>
LoopInterchangeProfitability::isProfitablePerInstrOrderCost() {
  // Legacy cost model: this is rough cost estimation algorithm. It counts the
  // good and bad order of induction variables in the instruction and allows
  // reordering if number of bad orders is more than good.
  int Cost = getInstrOrderCost();
  LLVM_DEBUG(dbgs() << "Cost = " << Cost << "\n");
  if (Cost < 0 && Cost < LoopInterchangeCostThreshold)
    return std::optional<bool>(true);

  return std::nullopt;
}

/// Return true if we can vectorize the loop specified by \p LoopId.
static bool canVectorize(const CharMatrix &DepMatrix, unsigned LoopId) {
  for (const auto &Dep : DepMatrix) {
    char Dir = Dep[LoopId];
    if (Dir != 'I' && Dir != '=')
      return false;
  }
  return true;
}

std::optional<bool> LoopInterchangeProfitability::isProfitableForVectorization(
    unsigned InnerLoopId, unsigned OuterLoopId, CharMatrix &DepMatrix) {
  // If the outer loop is not loop independent it is not profitable to move
  // this to inner position, since doing so would not enable inner loop
  // parallelism.
  if (!canVectorize(DepMatrix, OuterLoopId))
    return false;

  // If inner loop has dependence and outer loop is loop independent then it is
  // profitable to interchange to enable inner loop parallelism.
  if (!canVectorize(DepMatrix, InnerLoopId))
    return true;

  // If both the inner and the outer loop can be vectorized, it is necessary to
  // check the cost of each vectorized loop for profitability decision. At this
  // time we do not have a cost model to estimate them, so return nullopt.
  // TODO: Estimate the cost of vectorized loop when both the outer and the
  // inner loop can be vectorized.
  return std::nullopt;
}

bool LoopInterchangeProfitability::isProfitable(
    const Loop *InnerLoop, const Loop *OuterLoop, unsigned InnerLoopId,
    unsigned OuterLoopId, CharMatrix &DepMatrix, CacheCostManager &CCM) {
  // isProfitable() is structured to avoid endless loop interchange. If the
  // highest priority rule (isProfitablePerLoopCacheAnalysis by default) could
  // decide the profitability then, profitability check will stop and return the
  // analysis result. If it failed to determine it (e.g., cache analysis failed
  // to analyze the loopnest due to delinearization issues) then go ahead the
  // second highest priority rule (isProfitablePerInstrOrderCost by default).
  // Likewise, if it failed to analysis the profitability then only, the last
  // rule (isProfitableForVectorization by default) will decide.
  assert(noDuplicateRules(Profitabilities) && "Detect duplicate rules");
  std::optional<bool> shouldInterchange;
  for (RuleTy RT : Profitabilities) {
    switch (RT) {
    case RuleTy::PerLoopCacheAnalysis: {
      CacheCost *CC = CCM.getCacheCost();
      const DenseMap<const Loop *, unsigned> &CostMap = CCM.getCostMap();
      shouldInterchange = isProfitablePerLoopCacheAnalysis(CostMap, CC);
      break;
    }
    case RuleTy::PerInstrOrderCost:
      shouldInterchange = isProfitablePerInstrOrderCost();
      break;
    case RuleTy::ForVectorization:
      shouldInterchange =
          isProfitableForVectorization(InnerLoopId, OuterLoopId, DepMatrix);
      break;
    }

    // If this rule could determine the profitability, don't call subsequent
    // rules.
    if (shouldInterchange.has_value())
      break;
  }

  if (!shouldInterchange.has_value()) {
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "InterchangeNotProfitable",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Insufficient information to calculate the cost of loop for "
                "interchange.";
    });
    return false;
  } else if (!shouldInterchange.value()) {
    ORE->emit([&]() {
      return OptimizationRemarkMissed(DEBUG_TYPE, "InterchangeNotProfitable",
                                      InnerLoop->getStartLoc(),
                                      InnerLoop->getHeader())
             << "Interchanging loops is not considered to improve cache "
                "locality nor vectorization.";
    });
    return false;
  }
  return true;
}

void LoopInterchangeTransform::removeChildLoop(Loop *OuterLoop,
                                               Loop *InnerLoop) {
  for (Loop *L : *OuterLoop)
    if (L == InnerLoop) {
      OuterLoop->removeChildLoop(L);
      return;
    }
  llvm_unreachable("Couldn't find loop");
}

/// Update LoopInfo, after interchanging. NewInner and NewOuter refer to the
/// new inner and outer loop after interchanging: NewInner is the original
/// outer loop and NewOuter is the original inner loop.
///
/// Before interchanging, we have the following structure
/// Outer preheader
//  Outer header
//    Inner preheader
//    Inner header
//      Inner body
//      Inner latch
//   outer bbs
//   Outer latch
//
// After interchanging:
// Inner preheader
// Inner header
//   Outer preheader
//   Outer header
//     Inner body
//     outer bbs
//     Outer latch
//   Inner latch
void LoopInterchangeTransform::restructureLoops(
    Loop *NewInner, Loop *NewOuter, BasicBlock *OrigInnerPreHeader,
    BasicBlock *OrigOuterPreHeader) {
  Loop *OuterLoopParent = OuterLoop->getParentLoop();
  // The original inner loop preheader moves from the new inner loop to
  // the parent loop, if there is one.
  NewInner->removeBlockFromLoop(OrigInnerPreHeader);
  LI->changeLoopFor(OrigInnerPreHeader, OuterLoopParent);

  // Switch the loop levels.
  if (OuterLoopParent) {
    // Remove the loop from its parent loop.
    removeChildLoop(OuterLoopParent, NewInner);
    removeChildLoop(NewInner, NewOuter);
    OuterLoopParent->addChildLoop(NewOuter);
  } else {
    removeChildLoop(NewInner, NewOuter);
    LI->changeTopLevelLoop(NewInner, NewOuter);
  }
  while (!NewOuter->isInnermost())
    NewInner->addChildLoop(NewOuter->removeChildLoop(NewOuter->begin()));
  NewOuter->addChildLoop(NewInner);

  // BBs from the original inner loop.
  SmallVector<BasicBlock *, 8> OrigInnerBBs(NewOuter->blocks());

  // Add BBs from the original outer loop to the original inner loop (excluding
  // BBs already in inner loop)
  for (BasicBlock *BB : NewInner->blocks())
    if (LI->getLoopFor(BB) == NewInner)
      NewOuter->addBlockEntry(BB);

  // Now remove inner loop header and latch from the new inner loop and move
  // other BBs (the loop body) to the new inner loop.
  BasicBlock *OuterHeader = NewOuter->getHeader();
  BasicBlock *OuterLatch = NewOuter->getLoopLatch();
  for (BasicBlock *BB : OrigInnerBBs) {
    // Nothing will change for BBs in child loops.
    if (LI->getLoopFor(BB) != NewOuter)
      continue;
    // Remove the new outer loop header and latch from the new inner loop.
    if (BB == OuterHeader || BB == OuterLatch)
      NewInner->removeBlockFromLoop(BB);
    else
      LI->changeLoopFor(BB, NewInner);
  }

  // The preheader of the original outer loop becomes part of the new
  // outer loop.
  NewOuter->addBlockEntry(OrigOuterPreHeader);
  LI->changeLoopFor(OrigOuterPreHeader, NewOuter);

  // Tell SE that we move the loops around.
  SE->forgetLoop(NewOuter);
}

bool LoopInterchangeTransform::transform(
    ArrayRef<Instruction *> DropNoWrapInsts) {
  bool Transformed = false;

  if (InnerLoop->getSubLoops().empty()) {
    BasicBlock *InnerLoopPreHeader = InnerLoop->getLoopPreheader();
    LLVM_DEBUG(dbgs() << "Splitting the inner loop latch\n");
    auto &InductionPHIs = LIL.getInnerLoopInductions();
    if (InductionPHIs.empty()) {
      LLVM_DEBUG(dbgs() << "Failed to find the point to split loop latch \n");
      return false;
    }

    SmallVector<Instruction *, 8> InnerIndexVarList;
    for (PHINode *CurInductionPHI : InductionPHIs) {
      if (CurInductionPHI->getIncomingBlock(0) == InnerLoopPreHeader)
        InnerIndexVarList.push_back(
            dyn_cast<Instruction>(CurInductionPHI->getIncomingValue(1)));
      else
        InnerIndexVarList.push_back(
            dyn_cast<Instruction>(CurInductionPHI->getIncomingValue(0)));
    }

    // Create a new latch block for the inner loop. We split at the
    // current latch's terminator and then move the condition and all
    // operands that are not either loop-invariant or the induction PHI into the
    // new latch block.
    BasicBlock *NewLatch =
        SplitBlock(InnerLoop->getLoopLatch(),
                   InnerLoop->getLoopLatch()->getTerminator(), DT, LI);

    SmallSetVector<Instruction *, 4> WorkList;
    unsigned i = 0;
    auto MoveInstructions = [&i, &WorkList, this, &InductionPHIs, NewLatch]() {
      for (; i < WorkList.size(); i++) {
        // Duplicate instruction and move it the new latch. Update uses that
        // have been moved.
        Instruction *NewI = WorkList[i]->clone();
        NewI->insertBefore(NewLatch->getFirstNonPHIIt());
        assert(!NewI->mayHaveSideEffects() &&
               "Moving instructions with side-effects may change behavior of "
               "the loop nest!");
        for (Use &U : llvm::make_early_inc_range(WorkList[i]->uses())) {
          Instruction *UserI = cast<Instruction>(U.getUser());
          if (!InnerLoop->contains(UserI->getParent()) ||
              UserI->getParent() == NewLatch ||
              llvm::is_contained(InductionPHIs, UserI))
            U.set(NewI);
        }
        // Add operands of moved instruction to the worklist, except if they are
        // outside the inner loop or are the induction PHI.
        for (Value *Op : WorkList[i]->operands()) {
          Instruction *OpI = dyn_cast<Instruction>(Op);
          if (!OpI ||
              this->LI->getLoopFor(OpI->getParent()) != this->InnerLoop ||
              llvm::is_contained(InductionPHIs, OpI))
            continue;
          WorkList.insert(OpI);
        }
      }
    };

    // FIXME: Should we interchange when we have a constant condition?
    Instruction *CondI = dyn_cast<Instruction>(
        cast<BranchInst>(InnerLoop->getLoopLatch()->getTerminator())
            ->getCondition());
    if (CondI)
      WorkList.insert(CondI);
    MoveInstructions();
    for (Instruction *InnerIndexVar : InnerIndexVarList)
      WorkList.insert(cast<Instruction>(InnerIndexVar));
    MoveInstructions();
  }

  // Ensure the inner loop phi nodes have a separate basic block.
  BasicBlock *InnerLoopHeader = InnerLoop->getHeader();
  if (&*InnerLoopHeader->getFirstNonPHIIt() !=
      InnerLoopHeader->getTerminator()) {
    SplitBlock(InnerLoopHeader, InnerLoopHeader->getFirstNonPHIIt(), DT, LI);
    LLVM_DEBUG(dbgs() << "splitting InnerLoopHeader done\n");
  }

  // Instructions in the original inner loop preheader may depend on values
  // defined in the outer loop header. Move them there, because the original
  // inner loop preheader will become the entry into the interchanged loop nest.
  // Currently we move all instructions and rely on LICM to move invariant
  // instructions outside the loop nest.
  BasicBlock *InnerLoopPreHeader = InnerLoop->getLoopPreheader();
  BasicBlock *OuterLoopHeader = OuterLoop->getHeader();
  if (InnerLoopPreHeader != OuterLoopHeader) {
    for (Instruction &I :
         make_early_inc_range(make_range(InnerLoopPreHeader->begin(),
                                         std::prev(InnerLoopPreHeader->end()))))
      I.moveBeforePreserving(OuterLoopHeader->getTerminator()->getIterator());
  }

  Transformed |= adjustLoopLinks();
  if (!Transformed) {
    LLVM_DEBUG(dbgs() << "adjustLoopLinks failed\n");
    return false;
  }

  // Finally, drop the nsw/nuw flags from the instructions for reduction
  // calculations.
  for (Instruction *Reduction : DropNoWrapInsts) {
    Reduction->setHasNoSignedWrap(false);
    Reduction->setHasNoUnsignedWrap(false);
  }

  return true;
}

/// \brief Move all instructions except the terminator from FromBB right before
/// InsertBefore
static void moveBBContents(BasicBlock *FromBB, Instruction *InsertBefore) {
  BasicBlock *ToBB = InsertBefore->getParent();

  ToBB->splice(InsertBefore->getIterator(), FromBB, FromBB->begin(),
               FromBB->getTerminator()->getIterator());
}

/// Swap instructions between \p BB1 and \p BB2 but keep terminators intact.
static void swapBBContents(BasicBlock *BB1, BasicBlock *BB2) {
  // Save all non-terminator instructions of BB1 into TempInstrs and unlink them
  // from BB1 afterwards.
  auto Iter = map_range(*BB1, [](Instruction &I) { return &I; });
  SmallVector<Instruction *, 4> TempInstrs(Iter.begin(), std::prev(Iter.end()));
  for (Instruction *I : TempInstrs)
    I->removeFromParent();

  // Move instructions from BB2 to BB1.
  moveBBContents(BB2, BB1->getTerminator());

  // Move instructions from TempInstrs to BB2.
  for (Instruction *I : TempInstrs)
    I->insertBefore(BB2->getTerminator()->getIterator());
}

// Update BI to jump to NewBB instead of OldBB. Records updates to the
// dominator tree in DTUpdates. If \p MustUpdateOnce is true, assert that
// \p OldBB  is exactly once in BI's successor list.
static void updateSuccessor(BranchInst *BI, BasicBlock *OldBB,
                            BasicBlock *NewBB,
                            std::vector<DominatorTree::UpdateType> &DTUpdates,
                            bool MustUpdateOnce = true) {
  assert((!MustUpdateOnce || llvm::count(successors(BI), OldBB) == 1) &&
         "BI must jump to OldBB exactly once.");
  bool Changed = false;
  for (Use &Op : BI->operands())
    if (Op == OldBB) {
      Op.set(NewBB);
      Changed = true;
    }

  if (Changed) {
    DTUpdates.push_back(
        {DominatorTree::UpdateKind::Insert, BI->getParent(), NewBB});
    DTUpdates.push_back(
        {DominatorTree::UpdateKind::Delete, BI->getParent(), OldBB});
  }
  assert(Changed && "Expected a successor to be updated");
}

// Move Lcssa PHIs to the right place.
static void moveLCSSAPhis(BasicBlock *InnerExit, BasicBlock *InnerHeader,
                          BasicBlock *InnerLatch, BasicBlock *OuterHeader,
                          BasicBlock *OuterLatch, BasicBlock *OuterExit,
                          Loop *InnerLoop, LoopInfo *LI) {

  // Deal with LCSSA PHI nodes in the exit block of the inner loop, that are
  // defined either in the header or latch. Those blocks will become header and
  // latch of the new outer loop, and the only possible users can PHI nodes
  // in the exit block of the loop nest or the outer loop header (reduction
  // PHIs, in that case, the incoming value must be defined in the inner loop
  // header). We can just substitute the user with the incoming value and remove
  // the PHI.
  for (PHINode &P : make_early_inc_range(InnerExit->phis())) {
    assert(P.getNumIncomingValues() == 1 &&
           "Only loops with a single exit are supported!");

    // Incoming values are guaranteed be instructions currently.
    auto IncI = cast<Instruction>(P.getIncomingValueForBlock(InnerLatch));
    // In case of multi-level nested loops, follow LCSSA to find the incoming
    // value defined from the innermost loop.
    auto IncIInnerMost = cast<Instruction>(followLCSSA(IncI));
    // Skip phis with incoming values from the inner loop body, excluding the
    // header and latch.
    if (IncIInnerMost->getParent() != InnerLatch &&
        IncIInnerMost->getParent() != InnerHeader)
      continue;

    assert(all_of(P.users(),
                  [OuterHeader, OuterExit, IncI, InnerHeader](User *U) {
                    return (cast<PHINode>(U)->getParent() == OuterHeader &&
                            IncI->getParent() == InnerHeader) ||
                           cast<PHINode>(U)->getParent() == OuterExit;
                  }) &&
           "Can only replace phis iff the uses are in the loop nest exit or "
           "the incoming value is defined in the inner header (it will "
           "dominate all loop blocks after interchanging)");
    P.replaceAllUsesWith(IncI);
    P.eraseFromParent();
  }

  SmallVector<PHINode *, 8> LcssaInnerExit(
      llvm::make_pointer_range(InnerExit->phis()));

  SmallVector<PHINode *, 8> LcssaInnerLatch(
      llvm::make_pointer_range(InnerLatch->phis()));

  // Lcssa PHIs for values used outside the inner loop are in InnerExit.
  // If a PHI node has users outside of InnerExit, it has a use outside the
  // interchanged loop and we have to preserve it. We move these to
  // InnerLatch, which will become the new exit block for the innermost
  // loop after interchanging.
  for (PHINode *P : LcssaInnerExit)
    P->moveBefore(InnerLatch->getFirstNonPHIIt());

  // If the inner loop latch contains LCSSA PHIs, those come from a child loop
  // and we have to move them to the new inner latch.
  for (PHINode *P : LcssaInnerLatch)
    P->moveBefore(InnerExit->getFirstNonPHIIt());

  // Deal with LCSSA PHI nodes in the loop nest exit block. For PHIs that have
  // incoming values defined in the outer loop, we have to add a new PHI
  // in the inner loop latch, which became the exit block of the outer loop,
  // after interchanging.
  if (OuterExit) {
    for (PHINode &P : OuterExit->phis()) {
      if (P.getNumIncomingValues() != 1)
        continue;
      // Skip Phis with incoming values defined in the inner loop. Those should
      // already have been updated.
      auto I = dyn_cast<Instruction>(P.getIncomingValue(0));
      if (!I || LI->getLoopFor(I->getParent()) == InnerLoop)
        continue;

      PHINode *NewPhi = dyn_cast<PHINode>(P.clone());
      NewPhi->setIncomingValue(0, P.getIncomingValue(0));
      NewPhi->setIncomingBlock(0, OuterLatch);
      // We might have incoming edges from other BBs, i.e., the original outer
      // header.
      for (auto *Pred : predecessors(InnerLatch)) {
        if (Pred == OuterLatch)
          continue;
        NewPhi->addIncoming(P.getIncomingValue(0), Pred);
      }
      NewPhi->insertBefore(InnerLatch->getFirstNonPHIIt());
      P.setIncomingValue(0, NewPhi);
    }
  }

  // Now adjust the incoming blocks for the LCSSA PHIs.
  // For PHIs moved from Inner's exit block, we need to replace Inner's latch
  // with the new latch.
  InnerLatch->replacePhiUsesWith(InnerLatch, OuterLatch);
}

bool LoopInterchangeTransform::adjustLoopBranches() {
  LLVM_DEBUG(dbgs() << "adjustLoopBranches called\n");
  std::vector<DominatorTree::UpdateType> DTUpdates;

  BasicBlock *OuterLoopPreHeader = OuterLoop->getLoopPreheader();
  BasicBlock *InnerLoopPreHeader = InnerLoop->getLoopPreheader();

  assert(OuterLoopPreHeader != OuterLoop->getHeader() &&
         InnerLoopPreHeader != InnerLoop->getHeader() && OuterLoopPreHeader &&
         InnerLoopPreHeader && "Guaranteed by loop-simplify form");
  // Ensure that both preheaders do not contain PHI nodes and have single
  // predecessors. This allows us to move them easily. We use
  // InsertPreHeaderForLoop to create an 'extra' preheader, if the existing
  // preheaders do not satisfy those conditions.
  if (isa<PHINode>(OuterLoopPreHeader->begin()) ||
      !OuterLoopPreHeader->getUniquePredecessor())
    OuterLoopPreHeader =
        InsertPreheaderForLoop(OuterLoop, DT, LI, nullptr, true);
  if (InnerLoopPreHeader == OuterLoop->getHeader())
    InnerLoopPreHeader =
        InsertPreheaderForLoop(InnerLoop, DT, LI, nullptr, true);

  // Adjust the loop preheader
  BasicBlock *InnerLoopHeader = InnerLoop->getHeader();
  BasicBlock *OuterLoopHeader = OuterLoop->getHeader();
  BasicBlock *InnerLoopLatch = InnerLoop->getLoopLatch();
  BasicBlock *OuterLoopLatch = OuterLoop->getLoopLatch();
  BasicBlock *OuterLoopPredecessor = OuterLoopPreHeader->getUniquePredecessor();
  BasicBlock *InnerLoopLatchPredecessor =
      InnerLoopLatch->getUniquePredecessor();
  BasicBlock *InnerLoopLatchSuccessor;
  BasicBlock *OuterLoopLatchSuccessor;

  BranchInst *OuterLoopLatchBI =
      dyn_cast<BranchInst>(OuterLoopLatch->getTerminator());
  BranchInst *InnerLoopLatchBI =
      dyn_cast<BranchInst>(InnerLoopLatch->getTerminator());
  BranchInst *OuterLoopHeaderBI =
      dyn_cast<BranchInst>(OuterLoopHeader->getTerminator());
  BranchInst *InnerLoopHeaderBI =
      dyn_cast<BranchInst>(InnerLoopHeader->getTerminator());

  if (!OuterLoopPredecessor || !InnerLoopLatchPredecessor ||
      !OuterLoopLatchBI || !InnerLoopLatchBI || !OuterLoopHeaderBI ||
      !InnerLoopHeaderBI)
    return false;

  BranchInst *InnerLoopLatchPredecessorBI =
      dyn_cast<BranchInst>(InnerLoopLatchPredecessor->getTerminator());
  BranchInst *OuterLoopPredecessorBI =
      dyn_cast<BranchInst>(OuterLoopPredecessor->getTerminator());

  if (!OuterLoopPredecessorBI || !InnerLoopLatchPredecessorBI)
    return false;
  BasicBlock *InnerLoopHeaderSuccessor = InnerLoopHeader->getUniqueSuccessor();
  if (!InnerLoopHeaderSuccessor)
    return false;

  // Adjust Loop Preheader and headers.
  // The branches in the outer loop predecessor and the outer loop header can
  // be unconditional branches or conditional branches with duplicates. Consider
  // this when updating the successors.
  updateSuccessor(OuterLoopPredecessorBI, OuterLoopPreHeader,
                  InnerLoopPreHeader, DTUpdates, /*MustUpdateOnce=*/false);
  // The outer loop header might or might not branch to the outer latch.
  // We are guaranteed to branch to the inner loop preheader.
  if (llvm::is_contained(OuterLoopHeaderBI->successors(), OuterLoopLatch)) {
    // In this case the outerLoopHeader should branch to the InnerLoopLatch.
    updateSuccessor(OuterLoopHeaderBI, OuterLoopLatch, InnerLoopLatch,
                    DTUpdates,
                    /*MustUpdateOnce=*/false);
  }
  updateSuccessor(OuterLoopHeaderBI, InnerLoopPreHeader,
                  InnerLoopHeaderSuccessor, DTUpdates,
                  /*MustUpdateOnce=*/false);

  // Adjust reduction PHI's now that the incoming block has changed.
  InnerLoopHeaderSuccessor->replacePhiUsesWith(InnerLoopHeader,
                                               OuterLoopHeader);

  updateSuccessor(InnerLoopHeaderBI, InnerLoopHeaderSuccessor,
                  OuterLoopPreHeader, DTUpdates);

  // -------------Adjust loop latches-----------
  if (InnerLoopLatchBI->getSuccessor(0) == InnerLoopHeader)
    InnerLoopLatchSuccessor = InnerLoopLatchBI->getSuccessor(1);
  else
    InnerLoopLatchSuccessor = InnerLoopLatchBI->getSuccessor(0);

  updateSuccessor(InnerLoopLatchPredecessorBI, InnerLoopLatch,
                  InnerLoopLatchSuccessor, DTUpdates);

  if (OuterLoopLatchBI->getSuccessor(0) == OuterLoopHeader)
    OuterLoopLatchSuccessor = OuterLoopLatchBI->getSuccessor(1);
  else
    OuterLoopLatchSuccessor = OuterLoopLatchBI->getSuccessor(0);

  updateSuccessor(InnerLoopLatchBI, InnerLoopLatchSuccessor,
                  OuterLoopLatchSuccessor, DTUpdates);
  updateSuccessor(OuterLoopLatchBI, OuterLoopLatchSuccessor, InnerLoopLatch,
                  DTUpdates);

  DT->applyUpdates(DTUpdates);
  restructureLoops(OuterLoop, InnerLoop, InnerLoopPreHeader,
                   OuterLoopPreHeader);

  moveLCSSAPhis(InnerLoopLatchSuccessor, InnerLoopHeader, InnerLoopLatch,
                OuterLoopHeader, OuterLoopLatch, InnerLoop->getExitBlock(),
                InnerLoop, LI);
  // For PHIs in the exit block of the outer loop, outer's latch has been
  // replaced by Inners'.
  OuterLoopLatchSuccessor->replacePhiUsesWith(OuterLoopLatch, InnerLoopLatch);

  auto &OuterInnerReductions = LIL.getOuterInnerReductions();
  // Now update the reduction PHIs in the inner and outer loop headers.
  SmallVector<PHINode *, 4> InnerLoopPHIs, OuterLoopPHIs;
  for (PHINode &PHI : InnerLoopHeader->phis())
    if (OuterInnerReductions.contains(&PHI))
      InnerLoopPHIs.push_back(&PHI);

  for (PHINode &PHI : OuterLoopHeader->phis())
    if (OuterInnerReductions.contains(&PHI))
      OuterLoopPHIs.push_back(&PHI);

  // Now move the remaining reduction PHIs from outer to inner loop header and
  // vice versa. The PHI nodes must be part of a reduction across the inner and
  // outer loop and all the remains to do is and updating the incoming blocks.
  for (PHINode *PHI : OuterLoopPHIs) {
    LLVM_DEBUG(dbgs() << "Outer loop reduction PHIs:\n"; PHI->dump(););
    PHI->moveBefore(InnerLoopHeader->getFirstNonPHIIt());
    assert(OuterInnerReductions.count(PHI) && "Expected a reduction PHI node");
  }
  for (PHINode *PHI : InnerLoopPHIs) {
    LLVM_DEBUG(dbgs() << "Inner loop reduction PHIs:\n"; PHI->dump(););
    PHI->moveBefore(OuterLoopHeader->getFirstNonPHIIt());
    assert(OuterInnerReductions.count(PHI) && "Expected a reduction PHI node");
  }

  // Update the incoming blocks for moved PHI nodes.
  OuterLoopHeader->replacePhiUsesWith(InnerLoopPreHeader, OuterLoopPreHeader);
  OuterLoopHeader->replacePhiUsesWith(InnerLoopLatch, OuterLoopLatch);
  InnerLoopHeader->replacePhiUsesWith(OuterLoopPreHeader, InnerLoopPreHeader);
  InnerLoopHeader->replacePhiUsesWith(OuterLoopLatch, InnerLoopLatch);

  // Values defined in the outer loop header could be used in the inner loop
  // latch. In that case, we need to create LCSSA phis for them, because after
  // interchanging they will be defined in the new inner loop and used in the
  // new outer loop.
  SmallVector<Instruction *, 4> MayNeedLCSSAPhis;
  for (Instruction &I :
       make_range(OuterLoopHeader->begin(), std::prev(OuterLoopHeader->end())))
    MayNeedLCSSAPhis.push_back(&I);
  formLCSSAForInstructions(MayNeedLCSSAPhis, *DT, *LI, SE);

  return true;
}

bool LoopInterchangeTransform::adjustLoopLinks() {
  // Adjust all branches in the inner and outer loop.
  bool Changed = adjustLoopBranches();
  if (Changed) {
    // We have interchanged the preheaders so we need to interchange the data in
    // the preheaders as well. This is because the content of the inner
    // preheader was previously executed inside the outer loop.
    BasicBlock *OuterLoopPreHeader = OuterLoop->getLoopPreheader();
    BasicBlock *InnerLoopPreHeader = InnerLoop->getLoopPreheader();
    swapBBContents(OuterLoopPreHeader, InnerLoopPreHeader);
  }
  return Changed;
}

PreservedAnalyses LoopInterchangePass::run(LoopNest &LN,
                                           LoopAnalysisManager &AM,
                                           LoopStandardAnalysisResults &AR,
                                           LPMUpdater &U) {
  Function &F = *LN.getParent();
  SmallVector<Loop *, 8> LoopList(LN.getLoops());

  if (MaxMemInstrCount < 1) {
    LLVM_DEBUG(dbgs() << "MaxMemInstrCount should be at least 1");
    return PreservedAnalyses::all();
  }
  OptimizationRemarkEmitter ORE(&F);

  // Ensure minimum depth of the loop nest to do the interchange.
  if (!hasSupportedLoopDepth(LoopList, ORE))
    return PreservedAnalyses::all();
  // Ensure computable loop nest.
  if (!isComputableLoopNest(&AR.SE, LoopList)) {
    LLVM_DEBUG(dbgs() << "Not valid loop candidate for interchange\n");
    return PreservedAnalyses::all();
  }

  ORE.emit([&]() {
    return OptimizationRemarkAnalysis(DEBUG_TYPE, "Dependence",
                                      LN.getOutermostLoop().getStartLoc(),
                                      LN.getOutermostLoop().getHeader())
           << "Computed dependence info, invoking the transform.";
  });

  DependenceInfo DI(&F, &AR.AA, &AR.SE, &AR.LI);
  if (!LoopInterchange(&AR.SE, &AR.LI, &DI, &AR.DT, &AR, &ORE).run(LN))
    return PreservedAnalyses::all();
  U.markLoopNestChanged(true);
  return getLoopPassPreservedAnalyses();
}