#
# Refer to devd.conf(5) and devd(8) man pages for the details on how to
# run and configure devd.
#

# NB: All regular expressions have an implicit ^$ around them.
# NB: device-name is shorthand for 'match device-name'

options {
	# Each "directory" directive adds a directory to the list of
	# directories that we scan for files.  Files are loaded in the order
	# that they are returned from readdir(3).  The rule-sets are combined
	# to create a DFA that's used to match events to actions.
	directory "/etc/devd";
	directory "/usr/local/etc/devd";
	pid-file "/var/run/devd.pid";

	# Setup some shorthand for regex that we use later in the file.
	#XXX Yes, this is gross -- imp
	set wifi-driver-regex
		"(ath|bwi|bwn|ipw|iwlwifi|iwi|iwm|iwn|malo|mwl|otus|ral|rsu|rtw|rtwn|rum|\
		run|uath|upgt|ural|urtw|wpi|wtap|zyd)[0-9]+";
};

# Note that the attach/detach with the highest value wins, so that one can
# override these general rules.

#
# Configure the interface on attach.  Due to a historical accident, this
# script is called pccard_ether. We omit the usbus devices because those
# devices are associated with the USB Bus and provide an ifnet device to
# allow usb traffic to be captured with usbdump(8).
#
# NB: DETACH events are ignored; the kernel should handle all cleanup
#     (routes, arp cache).  Beware of races against immediate create
#     of a device with the same name; e.g.
#     ifconfig bridge0 destroy; ifconfig bridge0 create
#
notify 0 {
	match "system"		"IFNET";
	match "subsystem"	"!(usbus|wlan)[0-9]+";
	match "type"		"ATTACH";
	action "/etc/pccard_ether $subsystem start";
};

#
# Try to start dhclient on Ethernet-like interfaces when the link comes
# up.  Only devices that are configured to support DHCP will actually
# run it.  No link down rule exists because dhclient automatically exits
# when the link goes down.
#
notify 0 {
	match "system"		"IFNET";
	match "type"		"LINK_UP";
	media-type		"ethernet";
	action "service dhclient quietstart $subsystem";
};

#
# Like Ethernet devices, but separate because 802.11 require spawning
# wlan(4) interface.
#
attach 0 {
	device-name "$wifi-driver-regex";
	action "/etc/pccard_ether $device-name startchildren";
};
detach 0 {
	device-name "$wifi-driver-regex";
	action "/etc/pccard_ether $device-name stopchildren";
};
notify 0 {
	match "system"		"IFNET";
	match "type"		"LINK_UP";
	media-type		"802.11";
	action "service dhclient quietstart $subsystem";
};

# An entry like this might be in a different file, but is included here
# as an example of how to override things.  Normally 'ed50' would match
# the above attach/detach stuff, but the value of 100 makes it
# hard wired to 1.2.3.4.
attach 100 {
	device-name "ed50";
	action "ifconfig $device-name inet 1.2.3.4 netmask 0xffff0000";
};
detach 100 {
	device-name "ed50";
};

# When a USB Bluetooth dongle appears, activate it
attach 100 {
	device-name "ubt[0-9]+";
	action "service bluetooth quietstart $device-name";
};
detach 100 {
	device-name "ubt[0-9]+";
	action "service bluetooth quietstop $device-name";
};

# Firmware downloader for Atheros AR3011 based USB Bluetooth devices
#attach 100 {
#	match "vendor" "0x0cf3";
#	match "product" "0x3000";
#	action "sleep 2 && /usr/sbin/ath3kfw -d $device-name -f /usr/local/etc/ath3k-1.fw";
#};

# When a USB keyboard arrives, attach it as the console keyboard.
attach 100 {
	device-name "ukbd0";
	action "service syscons setkeyboard /dev/ukbd0";
};
detach 100 {
	device-name "ukbd0";
	action "service syscons setkeyboard /dev/kbd0";
};

notify 100 {
	match "system" "DEVFS";
	match "subsystem" "CDEV";
	match "type" "CREATE";
	match "cdev" "atp[0-9]+";

	action "service moused quietstart $cdev";
};

notify 100 {
	match "system" "DEVFS";
	match "subsystem" "CDEV";
	match "type" "CREATE";
	match "cdev" "ums[0-9]+";

	action "service moused quietstart $cdev";
};

notify 100 {
	match "system" "DEVFS";
	match "subsystem" "CDEV";
	match "type" "CREATE";
	match "cdev" "wsp[0-9]+";

	action "service moused quietstart $cdev";
};

notify 100 {
	match "system" "DEVFS";
	match "subsystem" "CDEV";
	match "type" "DESTROY";
	match "cdev" "ums[0-9]+";

	action "service moused stop $cdev";
};

# Don't even try to second guess what to do about drivers that don't
# match here.  Instead, pass it off to syslog.  Commented out for the
# moment, as the pnpinfo variable isn't set in devd yet.  Individual
# variables within the bus supplied pnpinfo are set.
nomatch 0 {
#	action "logger Unknown device: $pnpinfo $location $bus";
};

# Various logging of unknown devices.
nomatch 10 {
	match "bus" "uhub[0-9]+";
	action "logger Unknown USB device: vendor $vendor product $product \
		bus $bus";
};

# Some Cardbus cards don't offer numerical manufacturer/product IDs, just
# show the CIS info there.
nomatch 10 {
	match "bus" "cardbus[0-9]+";
	action "logger Unknown Cardbus device: device $device class $class \
		vendor $vendor bus $bus";
};

# Switch power profiles when the AC line state changes.
notify 10 {
	match "system"		"ACPI";
	match "subsystem"	"ACAD";
	action "service power_profile $notify";
};

# Notify all users before beginning emergency shutdown when we get
# a _CRT or _HOT thermal event and we're going to power down the system
# very soon.
notify 10 {
	match "system"		"ACPI";
	match "subsystem"	"Thermal";
	match "notify"		"0xcc";
	action "logger -p kern.emerg WARNING: system temperature too high, shutting down soon!";
};

# User requested suspend, so perform preparation steps and then execute
# the actual suspend process.
notify 10 {
	match "system"		"ACPI";
	match "subsystem"	"Suspend";
	action "/etc/rc.suspend acpi $notify";
};
notify 10 {
	match "system"		"ACPI";
	match "subsystem"	"Resume";
	action "/etc/rc.resume acpi $notify";
};

/* EXAMPLES TO END OF FILE

# Examples of notify hooks.  A notify is a generic way for a kernel
# subsystem to send event notification to userland.

# Here are some examples of ACPI notify handlers.  ACPI subsystems that
# generate notifies include the AC adapter, power/sleep buttons,
# control method batteries, lid switch, and thermal zones.
#
# Information returned is not always the same as the ACPI notify
# events.  See the ACPI specification for more information about
# notifies.  Here is the information returned for each subsystem:
#
# ACAD:            AC line state (0 is offline, 1 is online)
# Button:          Button pressed (0 for power, 1 for sleep)
# CMBAT:           ACPI battery events
# Lid:             Lid state (0 is closed, 1 is open)
# Suspend, Resume: Suspend and resume notification
# Thermal:         ACPI thermal zone events
#
# This example calls a script when the AC state changes, passing the
# notify value as the first argument.  If the state is 0x00, it might
# call some sysctls to implement economy mode.  If 0x01, it might set
# the mode to performance.
notify 10 {
	match "system"		"ACPI";
	match "subsystem"	"ACAD";
	action			"/etc/acpi_ac $notify";
};

# This example works around a memory leak in PostgreSQL, restarting
# it when the "user:postgres:swap:devctl=1G" rctl(8) rule gets triggered.
notify 0 {
	match "system"		"RCTL";
	match "rule"		"user:770:swap:.*";
	action			"service postgresql restart";
};

# Discard autofs caches, useful for the -media special map.
notify 100 {
	match "system" "GEOM";
	match "subsystem" "DEV";
	action "/usr/sbin/automount -c";
};

# Handle userland coredumps.
# This commented out handler makes it possible to run an
# automated debugging session after the core dump is generated.
# Replace action with a proper coredump handler, but be aware that
# it will run with elevated privileges.
notify 10 {
	match "system"          "kernel";
	match "subsystem"       "signal";
	match "type"            "coredump";
	action "logger $comm $core";
};

# Let the init(8) know there's a new USB serial interface it might
# want to run getty(8) for.  This includes device-side tty created
# by usb_template(4).
notify 100 {
	match "system"		"DEVFS";
	match "subsystem"	"CDEV";
	match "type"		"CREATE";
	match "cdev"		"ttyU[0-9]+";
	action "/sbin/init q";
};

*/