#!/bin/sh

#
# Copyright (c) 2012 Peter Holm <pho@FreeBSD.org>
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
# 1. Redistributions of source code must retain the above copyright
#    notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
#    notice, this list of conditions and the following disclaimer in the
#    documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
# FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
# OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
# HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
# OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
# SUCH DAMAGE.
#

[ `id -u ` -ne 0 ] && echo "Must be root!" && exit 1

. ../default.cfg

# core dumps seen in watchdogd after mlockall() was added.
# This scenario demonstrates the problem. Fixed in r242012.

# "panic: freeing mapped page 0xfffff8181b38a5e8" seen:
# https://people.freebsd.org/~pho/stress/log/mark030.txt

mem=`sysctl -n hw.usermem`
[ `sysctl -n vm.swap_total` -eq 0 ] && mem=$((mem / 100 * 60))

here=`pwd`
cd /tmp
sed '1,/^EOF/d' < $here/$0 > mlockall2.c
mycc -o mlockall2 -Wall -Wextra -O2 -g mlockall2.c || exit 1
rm -f mlockall2.c
cd $here

rm -f mlockall2.core
/tmp/mlockall2 $mem &
while kill -0 $! 2>/dev/null; do
        [ -r mlockall2.core ] && kill $! && break
        sleep 10
done
[ -r mlockall2.core ] && s=1 || s=0
pkill mlockall2
wait
rm -f /tmp/mlockall2 mlockall2.core
exit $s
EOF
#include <sys/types.h>
#include <sys/mman.h>
#include <sys/rtprio.h>
#include <sys/wait.h>

#include <err.h>
#include <signal.h>
#include <stdlib.h>
#include <time.h>
#include <unistd.h>

#define LOAD 40
#define N 90000
#define PARALLEL 5
#define RUNTIME 600

static long size;

static void
swap(void)
{
	long i;
	int page;
	volatile char *c;

	setproctitle("swap");
	c = malloc(size);
	while (c == NULL) {
		size -=  1024 * 1024;
		c = malloc(size);
	}
	page = getpagesize();
	for (;;) {
		i = 0;
		while (i < size) {
			c[i] = 0;
			i += page;
		}
	}
}

static void
test(void)
{
        pid_t p;
        int i, status;

	setproctitle("test");
        for (i = 0; i < N; i++) {
                if ((p = fork()) == 0) {
			_exit(0);
		}
                if (p > 0)
                        waitpid(p, &status, 0);
		if (status != 0)
			break;
        }
        _exit(0);
}

int
main(int argc __unused, char **argv)
{
	time_t start;
	struct rtprio rtp;
	pid_t pids[LOAD], pids2[PARALLEL];
        int i;

	size = atol(argv[1]) / LOAD * 1.5;
	for (i = 0; i < LOAD; i++)
		if ((pids[i] = fork()) == 0)
			swap();
	sleep(10);

	rtp.type = RTP_PRIO_REALTIME;
	rtp.prio = 0;
	if (rtprio(RTP_SET, 0, &rtp) == -1)
		err(1, "rtprio");

	if (madvise(0, 0, MADV_PROTECT) != 0)
		err(1, "madvise failed");
	if (mlockall(MCL_CURRENT | MCL_FUTURE) != 0)
		err(1, "mlockall failed");

	start = time(NULL);
	while (time(NULL) - start < RUNTIME) {
		for (i = 0; i < PARALLEL; i++) {
			if ((pids2[i] = fork()) == 0)
				test();
		}

		for (i = 0; i < PARALLEL; i++)
			if (waitpid(pids2[i], NULL, 0) != pids2[i])
				err(1, "waitpid(%d) (2)", pids2[i]);
		if (access("mlockall2.core", R_OK) == 0)
			break;
	}
	for (i = 0; i < LOAD; i++)
		kill(pids[i], SIGKILL);
	for (i = 0; i < LOAD; i++)
		if (waitpid(pids[i], NULL, 0) != pids[i])
			err(1, "waitpid(%d)", pids[i]);

        return (0);
}